PROFILE REQUEST THREAD January 2011

Thanks for the Acme Fury profile works perfectly.
I also have 8 LED PAR64, they are unbranded and I believe came direct from china. They work very well and have no faults. I usually run them from basic dmx controller but if possible would like to run them via mydmx. I have a basic manual and the only settings it gives is as follows (I have worked my way throug the generic files already).

DMX512 CONTROL
CH1 STROBE (0-151) RGB DIMMER IS FROM BRIGHT TO DARK
(153-242) STROBE FLASH FROM QUICK TO SLOW
CH2 RED DIMMER IS FROM BRIGHT TO DARK
CH3 GREEN DIMMER IS FROM BRIGHT TO DARK
CH4 BLUES DIMMER IS FROM BRIGHT TO DARK

Also can someone point me to a video of how steps work, I just do not get it. Simple set up for a band, 3 minicolor bars, 1 acme fury and 8 par 64s 9if I can get a profile for the par 64s)

thanks

Is there a chance I could get a profile made for this light.
Channel #1 Pan
Channel #2 Fine Pan (moves very slightly for finer accuracy)
Channel #3 Tilt
Channel #4 Fine Tilt (moves very slightly for finer accuracy)
Channel #5 0-255 Pan and Tilt movement speed (fast-slow)
Channel #6 0-7 Closed
8-134 Master dim (bright-dim)
135-239 Strobe (slow-fast)
240-255 Open
Channel #7 0-255 Controls Red LED's (dim-bright)
Channel #8 0-255 Controls Green LED's (dim-bright)
Channel #9 0-255 Controls Blue LED's (dim-bright)
Channel #10 Controls Colors
0-7 Not used
8-21 White
22-34 Red
35-48 Dark Green
49-62 Dark Blue
63-76 Light Blue
77-90 Magenta
91-118 Yellow
119-132 Purple
133-146 Blue/White
147-160 Aqua
161-174 Teal
175-188 Lime Green
189-202 Light Aqua
203-216 Green/white
217-230 Violet
231-255 Color Change
Channel #11 Color change speed (channel #10 must be set on color change)
Channel #12 0-127 8 Preset color and movement locations
128-255 Preset color and movement locations that will change to sound
Many Thanks,
Jim

Jim, what's the make/model of this fixture? That way JIngles can give it a better profile name when he's able to get it to you.

Thanks Chris, ya think I would have remembered that.

Whirl 18x3 Whirl 18x3

Thanks,
Jim

Hey James. You know I have emailed stage ape and sent them the profiles I made. And they said they have made a lot of profiles for my dmx too. but they never emailed them to me. but I downloaded the manual and I will make it ASAP. I have a lot to do before I go to mobile beat next week with ADJ. But I will definitely make sure all request have been filled before I leave.
Sincerely,

MBCL here is your generic par 64 LED: http://db.tt/U3FzXiG

You did not mention a name so it is named after your forum name.
Sincerely,

Thanks Jingles

James here is the whirl: http://db.tt/AZYGpG3
It is 12 channel mode. Trust me use the fine pan and tilt channels.
Have a good weekend everybody!
Sincerely,

Thank You Very Much Jingles! Have a great weekend

Jim

you're very welcome.
Sincerely,

Feature, sorry I almost forgot about your post.
I'll try to find the manual from the martin site.

BTW do you have a aol account with the same name?
Sincerely,

Feature here is the Zr44 high mass fogger: http://db.tt/Qv4J4Mw


Sincerely,

Hi Jingles, Hope your ok, Looking for a profile for a laser, it is The laserworld CS-400G, All i know is that it has 12 Channels, Can you help, Cheers

James,

Sent you a reply to your email message. Thanks again for finding me the profile. Without a doubt you guys on here are awesome.

Sincerely,

Kris B.

James,

I want to see if I can make one more request. I need a profile for the Ultratec/Le Maitre Radiance Hazer. Here is the link to the manual because I think the one I have is not correct, but maybe it is. I don't know.


http://www.internallysound.com...er_manual/manual.pdf

Thanks again for the help,

Kris B.

Jingles

Thanks for the Jellydome profile

regards

Sean

James,

Actually don't need the Radiance Hazer profile. My previous one you made me a few months back worked great. Thanks a million.

Thanks,

Kris B.

Thanks Jingles, unfortunately it does not work properly (I get some function, but nothing usable). Is there anyway I can figure out manually the addresses should be, so a profile an be made?

quote:

MBCL here is your generic par 64 LED: http://db.tt/U3FzXiG

You did not mention a name so it is named after your forum name.

You'll have to go through each channel and write down the value range.
For example ch 1-3 are RGB 0-255 channel 4 0-33 shutter close 34-127. Etc.

@ipanic, I need a manual with the DMX traits so that way I can see if i have it made already.

BTw this thread is now closed. If You were not helped or still need help please post a reply in the Feburary profile request thread Located here: Feb. 2011 Profile Request thread
Sincerely,