All of my programs are set up with my moving heads hanging up side down but i recently used 4 trusses so i would like to set up the stage with 4 trusses but i dont know how to do that
Original Post
Replies sorted oldest to newest
Are you using My DMX? If so let me know and I will move this thread to the correct forum section. Thanks.
Welcome to the forums.
Sincerely,
Welcome to the forums.
Sincerely,
yes i am using My DMX sorry about that
How did you set up your 3D before? It is the same method. go to construction mode (click on the small hard hat button).
Then you have a split screen now the top half should be the 3D environment and the bottom half should be the settings and listing section. click on the objects tab in the listing section and find the objects you would like to move and click on one of them or hold down CTRL on your keyboard and select several objects at once. once you have them selected, look over at the Settings section and you will see 6 fields for numbers. the fields are: X,Y,Z. The X Y Z are for moving the selected object(s) up or down(Y) left and right(X) and front and back(Z). The other three are, dX, dY, dZ. Those are for rotating the object on that specific axis. once you move your objects to where you want go to the fixtures tab and select the fixtures you want to move using the same method for objects. The only difference is between objects and fixtures is just that; Moving objects and then moving fixtures that you have patched.
Make sense? Let me know.
Sincerely,
Then you have a split screen now the top half should be the 3D environment and the bottom half should be the settings and listing section. click on the objects tab in the listing section and find the objects you would like to move and click on one of them or hold down CTRL on your keyboard and select several objects at once. once you have them selected, look over at the Settings section and you will see 6 fields for numbers. the fields are: X,Y,Z. The X Y Z are for moving the selected object(s) up or down(Y) left and right(X) and front and back(Z). The other three are, dX, dY, dZ. Those are for rotating the object on that specific axis. once you move your objects to where you want go to the fixtures tab and select the fixtures you want to move using the same method for objects. The only difference is between objects and fixtures is just that; Moving objects and then moving fixtures that you have patched.
Make sense? Let me know.
Sincerely,
I got the 4 trusses on the stage but when i click the add fixture button nothing happens. Is there anything i can do?
Sorry for the huge delay. did you solve this on your own? or do you till need help?
Yes i got it i just needed to loose a different computer thank you for your patience
I have dragged a file in the program with programs already in it. I want to add to these programs but the lightbeam is not showing up on the fixtures is there any way to get this working?
What fixture profile is it?
the elation 250 design spot moving heads
Those should work fine in the 3D. Just got to open the shutter and bring the dimmer to 255 and you should get output.
How do i know which part of the is forward on the 3d visualizer
you can at any time press the "1" key on your keyboard and it give you the front camera view. Is this what you meant? Also there is a camera option in the menu to see the keyboard shortcuts and also record I think 2 of your own camera angles.
Sincerely,
Sincerely,