SSL Profile Needed

hi, i searched for a "LED Par 7ch" and got this profile as a result and it matched exactly to the DMX traits you wrote.
The profile i found is attached.

Hi, you posted this in the Compu Show show area, so i made it as .ssl2 since thats what compu show takes.
you are able to convert it yourself, just open up the scan library editor and open the file and do save as, then change it to .ssl

@Jingles8302 thanks it works!

Hey @Jingles8302 would you be able to please create an SSL for the PolarLights A700F?

@MLC posted:

Hey @Jingles8302 would you be able to please create an SSL for the PolarLights A700F?

Hi MLC, so its been pretty busy lately, can you please make a request using the official form and i will try to get it out to you asap? https://bit.ly/2M2gkAi
Thanks!

Hello sir, I am a hobbyst lighting guy (a simple forum member, not the expert) I have made the ssl2 fiile for your moving head and i will attach it here so you can try it and see if it works with your lights. I jus tested it by patching it to mydmx 2.1 and it didn`t crash. So only you can do the real live tests because i don`t have your lights. Enjoy

@Cata wow thanks so much!  I’ll give it a try asap!  

You`re welcome, it was my pleasure to help. Let me know, when you have time, if everything works ok, or if there are problems tell me and i can check and solve them. Thank you

@Jingles8302 I submitted the profile request.  I'd need an SSL for CompuShow 2006 but can convert an SSL2 if needed. The request link did not give me an option for Elation software btw.

Hello is the ssl2 file that I send you in the previous post good for converting? Do you have the possibility of doing that? Sorry I am a myDMX guy I didn`t use compushow older than 2021 that I believe it has ssl2 if I remember correctly

Here is the ssl2 file i was talking about, maybe you can convert it if you have the possibility

@Cata posted:

Hello is the ssl2 file that I send you in the previous post good for converting? Do you have the possibility of doing that? Sorry I am a myDMX guy I didn`t use compushow older than 2021 that I believe it has ssl2 if I remember correctly

Thanks but it did not work.  Figured I would ask the ADJ guys if they could make a profile too just for comparison.

Hello, sorry to hear that. As a last thing, if the Adj staff have a hard time too to get it to work, keep in mind that very often the chinese lights have incomplete or wrong typed user manuals. So if that could be your case, the solution takes some time and it is this one: Get (you can borrow it from someone) a physical 128 or 512 channels controller with minimum 24 or 48 faders, a ''desk'' type (like the one in the attached picture) and connect the light to it and move slowly every fader to see what the respective channel does and see its values and write them down to a paper for every channel individually. So basically write your own correct manual for the light and share it so somebody could make you a correct ssl profile for the light. I, as a lighting guy, I always use a desk like that to find the channels of an unbranded or wrong typed user manual of a light. Thank you