Skip to main content

Closed66 replies

November Profile Request Thread.

J JinglesForum Admin
Welcome to the November 2010 Profile Request thread. Please keep on-topic.

A few reminder rules:

1: When making a request, please state the make and model of the fixture.

2: Please post a link to the manual or a photo of the DMX traits or post the DMX traits. Please, English versions preferred.

3: If posting traits, please be as complete as possible.

4: Please be patient. It's best to make sure you're not under a deadline, like "I need it in 2 hours" for example. Please allow a bit of time. A couple of days is reasonable.

5: Please check the updated scan library link on the my dmx product page for your fixtures before requesting profiles. Or join my shared drop box folder. http://db.tt/6q9QkL The link for profiles on the my dmx product page can be found at the bottom of every one of my post.

Also let me add that if someone else get's their profile before you but you posted your request before them please do not be offended as some profiles take more time than others
Thanks and have fun.
Last edited {1}
Original Post

Replies sorted oldest to newest

FM Former Member
@ Jingles: I've finally had an answer of somebody who sells the AZTEK venus laser. The DMX is worthless.. there are a dmx in and dmx out in the laser but they are useless..
That's why your profile didn't work..
I'm sorry for al the work you had with it for me..
AZTEK is NOT!! AZTEC-ELECTRONICS, it's an other company. If someone considers to buy something from AZTEK : DON'T DO IT! It's a complete ripoff!!!
FM Former Member
quote:
Originally posted by Jingles:
That's too bad. It's ok. Now you should go out and buy a Galaxian sky laser from ADJ. Also be on the look out for our new laser we will have coming out this year or sometime after January. Really awesome effects coming out.
Sincerely,


Can I have a sneakpeak of this new laser? :P
FM Former Member
Hi Jingles -

I need a profile for the Chauvet Q Spot 260 LED Moving Head
DMX Channel Summary
Advanced
Channel
Function
Basic
Channel
Function
1
Pan
1
Pan
2
Pan Fine
2
Tilt
3
Tilt
3
Color Wheel
4
Tilt Fine
4
Fixed Gobo Wheel (#1)
5
Pan / Tilt Speed
5
Rotating Gobo Wheel (#2)
6
Color Wheel
6
Gobo Rotation
7
Fixed Gobo Wheel (#1)
7
Rotating Prism
8
Rotating Gobo Wheel (#2)
8
Focus
9
Gobo Rotation
9
Dimmer
10
Rotating Prism
10
Strobe
11
Focus
11
Control
12
Dimmer
13
Strobe
14
Control
J JinglesForum Admin
rob here is the mega tri bar channels 10-12 for 12 channel mode operation.
http://db.tt/iH4hrfR
so here is what you do. in the dmx universe grid insert 3 of the _generic RGb profile to get your 9 channels of RGb control then use one of the profile I have just linked you too for your channel 10 11 and 12 control modes and master dimmer. Let me know if this make sense. I sincerely apologize about the delay.
Sincerely,
FM Former Member
Hey Jingles,

I'm helping a friend get a club set up here in our small town, and talked him into the MY DMX software. Then his invester talked him into buying cheap lighing from China, which doesn't have a profile inside My DMX. UGH! SO I have been trying to get them working for about a week before I broke down and now I am posting. Here are links to documents for both fixtures. I really hope you are able to gleen enough info to create a profile for them.

Thanks for your help,
Dallas

http://dl.dropbox.com/u/159863...ER%20648-5%20RGB.pdf

http://dl.dropbox.com/u/159863...ser%20Controller.pdf
J JinglesForum Admin
also what's so confusing about this manual is it list dmx value but then there is a percentage symbol next to it. but dmx (hex)values are different than percentage values. lol so that is what's trowing me off. Are those actual dmx channel values or dmx channel values in percentage?
Also what's funny is the 39 channel mode chart channels 4-39 have Apr-39. but the funny part is April(Apr) is month 4 in the year haha! So do you want 3 or 29 channel mode?
Sincerely,
FM Former Member
Hey Jingles,

Sorry about the "Apr-39," I had to created both these manuals from scratch. It is actually 4-39. But I am never going to want to run it in 39 channel mode as 4-39 are just on/off for each individual laser. The percentages now actually paying attention to what I wrote they look more like they are normal binary values, that represent much different percentage values. (1-7 would be like 3%)SO ignore the percentage sign. Sorry man, and thanks for taking the time to do this.

I will be controlling 4 of these with 8 lasers on each is how this config is looking like its gonna have to be laid out. I told him next time just buy all ADJ.

Dallas
Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×