Vizi CMY 300

Hi, are you able to grab the first 4 channels of the fixture on a fader or enc oder and manipulate them manually? Like a DMX tester?
do you have another small DMX board to manually test them with?

@Jingles8302 I put channel 120 on a fader, The light did react when the fader was put to 42%. All the addreses are patched to 120 though starting at P2 at 351 with P1 being the light.

Does your console support moving lights or is it more geared towards conventional dimmers and theatrical controls?
For me P2 at 351 just doesn't make sense..? channels 351? But others are at 120?
you've lost me i'm afraid, i don't have experience on this board i'm sorry.
but i do know ETC are super helpful so if you call them they may be able to walk you through this.

@Jingles8302 We had moving lights on this board before I was around. if you look at the picture I sent with the orginal post you can see the channles and the the address that I am talking about. The channel for the light is 120 and the addresses are 350 through 374 for a 24channel light This is how I was told to set it up unknown if that correct or not because I have always worked with just LEDS and your normal dimmers. So if you got no more ideas I will give ETC a call and see if them can give me a hand. Thanks so much.