NEW VMS4 Tractor Mapping

after torq xponent, i changed to vms4, because i thougt traktor or virtualDJ is better software.First thing: the support of M-audio is much better, with videotutorials,... on how to install everything. Is it possible that american audio show me how to install the vms4 with traktor, show config settings of traktor & vms4 with a tsi that actually works with the VMS4, for all the 4 decks, with al the buttons, faders,...working? Wasn't that why it is designed for?
I did not like Virtual DJ at all, Torq is much better in looping, sync, samples and effects so al my hope is on traktor pro now.

I agree that VDJ is not the best, Traktor Pro has more features, and is more solid. Traktor Pro is very easy to get up and running with the VMS4.

Virtual DJ is working right out of the box, but is it possible that someone can show me (traktor pro) from scratch, wich driver you have to install, settings in traktor, settings on the VMS4?
maybe with a youtube movie?

quote:

Originally posted by Patrick_belgium:
Virtual DJ is working right out of the box, but is it possible that someone can show me (traktor pro) from scratch, wich driver you have to install, settings in traktor, settings on the VMS4?
maybe with a youtube movie?

im´totally with you... if somebody could also show me such kind of working tsi file work traktor scratch pro, i would be very very amused about...

i think the intention of working with trakor is that you can control the vms4 completely, every knob, button you push on the controller, light up on the vms4 and change also on your computerscreen, no? with my previous M-audio torq system i've had full control with the xponent, everything worked. when i import the tsi file of adj, nothing worked, just when i use a fader, i hear music, but that's all, nothing goes in sync on my screen, no looping, no effects... it's dissapointing that when you buy a product, and ADJ show it on youtube with traktor, they can't give us a good support on how to get it working with traktor.

Here is an updated up the last file I posted along with a PDF or AI file of the mapping.

If you note any problems please note them and i will take care of them in an update.

http://dl.dropbox.com/u/362173...g%20n%20Document.zip

there is scratch mode in it?

yes activate it by pressing the vinyl button, why dont you check out the mapping diagrams that would tell you what is mapped to what.

I have fixed the problems with the Filter interfering with FX 2 on advanced FX on Decks A/C

http://dl.dropbox.com/u/362173...0n%20Document%20.zip

Same file name so delete old file,

i just tryed this with traktor duo and it works.....somewhat lol only a couple of buttons need to be assigned like the pause buttons but everything else seems to work perfectly. i am way more happy to use traktor over vdj it seems like its a more powerful program

Link doesn't work !!

quote:

Originally posted by G-Style:
Link doesn't work !!

it's a dropbox link, normally the PC host the file needs to be connected to the internet, i guess Leo's has just turned off his laptop/PC.

I'm sure it will be back later

ahhhh right cheers for that m8

Is there any reason why none of the lights work with this map ?

didnt have a closer look at the mapping so far, but in order to make the lights work, traktor needs a separate output controller for each control that can hold lights. could you just check if that's the case?

I did not know if i turned off my computer dropbox didnt work thanks for the 411 JSM. I have posted the same file on traktorfreaks. The LED should be working "G" @ one point The hot cues didnt work. I have updated it today because of a filter conflict.

Link http://www.traktorbible.com/fr...pingview.aspx?id=100

Nice Mapping!

Im currently trying to figure out, how u can make
the jogwheel workin like on the VCI-100, like u said it is possible when having those rubber bands on.

i get maybe different midivalues, but somehow it doesnt work. ihearyou have u any idea how to handle it?

(i mean, that if u tought the SIDE of the jogwheel u have pitchbend like when vinyl mode NOT on and when ud touch the inside it goes scratch).

thx!

I figured it out:

I added to the mapping the Jogwheels Function:

While in Vinyl Mode u can Tempo (pitch) bend while u touch rubber bands only. if u touch the middle u have normal scratch.

I also improved some things which made me some trouble some time (i cant really remember which). The Deck A/C Sync button for both Decks was inverted and some things.

and if u press the select on /oFff button while in chained fx mode u can switch the FX dry wet controller -50% each press (cant do 100 somehow).
i needed that because on an impact i needed that instant FX OFF button. If someone can tell me how set the FX to 0 when pressed? when i "set to value 0" it goes while pressed to 127. (not good )

greetings!

http://www15.zippyshare.com/v/76113669/file.html

Try it out

[QUOTE]Originally posted by Insidiousdead:
I figured it out:

I added to the mapping the Jogwheels Function:

While in Vinyl Mode u can Tempo (pitch) bend while u touch rubber bands only. if u touch the middle u have normal scratch.

HEY INSIDIOSDEAD...if you noticed the mapping for the jog wheel when the vinyl mode is on will allow you to pitch bend by using the sides( if you remove the insulator, metal is conductive so you defeat the purpose) if you like to pitch bend instead of scratching press the vinyl button this will set the deck to pitchbend mode.