Hello, I have 2 questions. 1. Does not a slow color change go wrong? I would like to adjust a very slow color change. So that each color in about 3 or 4 seconds to go through. This does not work with my software The Light. 2. Question How do I set gobomorphing? The video shows gobomorphing. thanks
Replies sorted oldest to newest
Hello Rocco, since the Focus Spot Three Z is a fixture with a color wheel the colors will not be able to fade in or out. Since the color isn't built into the LED it won't be able to fade in and out when changing colors.
As for your second question, what video are you referring to in regards to gobo morphing?
I would like to add to point 1 that, if you go to the part o the color wheel where you can split the colors, and use a fade time to go from any point in the split color to a full color it should somewhat "fade" but its just the wheel slowly adjusting the wheel from one end to the other, does that make sense? If you are using a DMX software, you would need to check to see if the color channels is allowed to fade in the software settings.
