Ok,
Something thats bugging me....
Say for example i have 4 Moving head spots. All individually assigned their own channel assignment so i can take individual control of each head.
Say the shutter i want on open, the dimmer up to full, the colour set to blue, the gobo set to "bubbles" and it rotating anti clockwise at a slow speed.
If i want every head to do this...i have to do them all individually and go through each and every one setting up each channel again and again.
BUT, is their a way that you (or Daslight!) can write into the software and allow fixture "grouping". This is where you can grab hold of multiple same type fixtures, and by smiply adjusting one, will set them all to do the same thing?
I know this may seem lazy, but when your programming a rig of movers, scans, etc over a dancefloor, its sometimes annoying when you have to spend time doing each and every fixture. By "grouping" it would be so much quicker and easier.
Plus, if you create a scene using the FX Generator, by grouping the fixtures to the same colour, gobo etc, you can then just adjust the PHASING to get slight differences quicker.
Whats your views ADJ and other mydmx users???
Original Post