D-Light Sync Pak Squeaking

Might be normal. Run them a bit longer and see if it "resolves" itself.

My moving head fixtures still make noise when moving, but I can tell it's the motors, which is what I would expect to hear. I don't think that's at all what you're talking about. Squeaking doesn't sound anything like motor noise.

I would contact service after running the fixtures some more. If they fixtures are still squeaking after more run-time, see what they recommend for any sort of lubricant or possible things to examine. Just have your fixtures nearby and maybe some basic tools to crack the fixture open under advisement.

Tom
The sound you are hearing from the light is normal, it is caused by the brushes rubbing along the shaft.

Im getting a dmx controller and want to control these lights using dmx. theres no dip switches to set the dmx channel, so how can they be controlled with dmx? are there dmx addresses set for each light? where do i find this info? thanks

Here is the manual: http://www.americandj.com/pdff...ht%20Sync%20220v.pdf

Sincerely,

DJMatt431
There no need to address this fixture. The D-light Sync is factory set to start at channel 1.

Channel 1 controls the Lamp on/off function which includes some strobing and channel 2 controls the motor movement.

i have 4 of them linked to one dmx cable and on a dmx operator, would i have to push 4 fixtures on? would each fixture equal 1 channel? how would that work

On the dmx operator the fixture one button is channels 1-16. So all you need to have on us fixture one button. And your first and second faders will control the lights.