Skip to main content

4 replies

accu spot 250 & accu spot 250 II addres & dimmer value.

R reneMember
I have 2 accu spot 250 & 1 accu spot 250 II
,I am using a Freekie dmx controller .

I want to run all 3 in different channels ,so I need to know wich will be the right addres for each one.

I know fixture 1 wll be addres 1 , fixture 2 will be addres # 13 ,& fixture 3 will be addres #25 right?

I n the accu spot 250 II owners manual in the rdmx seccion says:
The unit will be shipped preset in 16 increments from the factory .
According to this fixture 1 = #1 fixture 2 = #17
and fixture3 =#34 ???

Please I need help in getting the right addres for my lights , also I need to know the value of the dimmer in 8 channel operation.
And the dimmer value for the accu spot 250 Please??

Some body help me!!
Original Post

Replies sorted oldest to newest

J JinglesForum Admin
The 250's i believe don't have a dimmer value. It was not something that was introduced to the series until after the 250 II.

for the 250 II's you have the option for 8 channel mode or 9 channel mode.

So first address at 8 channels is fx 1=1 fx 2=9 fx 3 (Reg Spot 250) would be 17.

So Second address at 9 channels is fx 1=1 fx 2=10 fx 3 (Reg Spot 250) would be 20. Make sense? It's simply basic math. Just gotta wrap your head around it.
Sincerely,

sincerely,

Add Reply

Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×