PS2 help please!!!!!

When you hit the Scratch button, is it Red or is it Green? If it is Red then you are in "Skid" mode which will explain what is happening to you from your description. Another problem could be is that the PSP default in scratch mode is set either 3 or 4, try setting it to zero. Good luck

ROQ out.

Roq it is green when I hit the scratch button ana i tried all the pre-sets. any other advice?

The jog wheel is definatly dead, has anyone else had to replace theirs. How much is it gonna set me back. or if warranty will take care of it how long is their turn around time?

It sounds like you might have yourself a faulty one. I've only seen another PS2 in the way you described it, it's very rare. Not to worry though.. Call this toll free #.. 1-800 322 6337 , and ask for Tech Support. They will take care of your problem.

Before you go to tech support can I suggest one more thing....there is this one hotel I used to work at and everytime without fail the platters on both PS2s would not react. It turns out that the power in the building was to blame, it was an older building with suspect internal wiring.

As you may or may not know the touch sensitivity relys on the bodys ability to conduct, store and discharge ambient electricity. If there is a bad earth in the power where your PS2's are connected, potentially they can constantly be in a state of discharge which will not allow ambient electricity to pass from the body to the platter correctly.

Can I suggest you take your PS2 to a different location/house/building and see if you get the same results. It could be as simple as that. Good luck.

ROQ out.

Gave it a try Roq but still nothing. Looks like it might have to be a call to support. I'm located in Canada, are there any American DJ offices here to send it to and what the turn around time usually if any one has had to send their ps2 in.

All of your questions will be best answered by Tech Support. Give the # a call.. it's the best way to go.