problem pan tilt

paiuraMobile DJ

Hello everyone
I have a problem that maybe depends on my inexperience in using the software.
Working in different places, I need the movement of the moving heads to be set in the first scene and then copied in all the subsequent scenes and all the steps within those scenes.
Instead I see that upon changing a scene the moving head returns to its 0 position.
How can I make sure that the pan tilt is locked so that it does not keep moving at the change of each scene?

Thank you very much

Translated with DeepL

2/5/2312:59 AM

❤️ 0

Original Post

Replies sorted oldest to newest

Jingles8302Admin

Hi, it may be best to simply duplicate the scene where the PT values are set instead of hitting the new scene button.

2/6/239:45 AM

❤️ 0

paiuraMobile DJ

Hi thanks for the reply, my problem is that I have to program the scenes before entering the theater so I have to all the steps first and then I know the positioning of the pan tilt parameters.

2/6/2310:37 AM

❤️ 0

paiuraMobile DJ

It would be very convenient to be able to block in some way (OFF) of the Channel

2/6/2310:37 AM

❤️ 0

paiuraMobile DJ

another solution would be to be able to select all scenes and set values. (It can be done only in the individual steps)

2/6/2310:38 AM

❤️ 0

Jingles8302Admin

Hi, yes unfortunately I don't think any of those features you want are available in mydmx 3 right now. Sorry.