Mr Kool ii Pump Stops

Hi everyone, apologies if I'm in the wrong part of the forum.

I'm after some advice on a Mr Kool ii I've just purchased please. I've tested it today but it seems to cut out after a minute or so.

Symptoms - All seems to be working fine, I set it to continuous but after a minute or so, the pump stops stopping it from producing fog. The fan seems to keep blowing though. I've checked all connections, all levels are full, and the timer is not engaged (yellow light off).

Any guidance would be greatly received.

Thank you.

Doc

10/28/229:25 AM

❤️ 0

Original Post

Replies sorted oldest to newest

Jingles8302Admin

Hi, "continuous" for this machine just means it will keep flowing it as it can with more more interaction on your part, it does however still need to re-heat the heater as it cools down as it pumps out low-lying fog, so there will be brief periods of nothing, and then it should go right back to outputting on its own.

10/28/2212:24 PM

❤️ 1

Doc HollidayMember

That's perfect, thank you! So happy there isn't a fault with it.

Thanks again for your help, really appreciate it.

10/28/2212:27 PM

❤️ 0