Well I have 7 channel mode made but really you don't need a custom profile for this type of channel layout as it is simple enough to just build in the program using generic profiles. for example for 14 channel you use a par 36,56 or 64 profile and then use 4 of the generic RGB profiles and then add anther par 36 56 or 64 and that is your master dimmer, RGB section, and then strobe. Make sense? It's the same way for 26 channel mode. 1 Dimmer, 8 RGB's, then another dimmer. You just have to remember the last dimmer is 10-255 for strobe. Let me know if you need a picture example but i have already posted a example of this type of building on these forums before so you should be able to search it. Let me know. Sincerely,
you must understand I cannot build a proper profile for that channel mode however you can piece your own together in the program. Take a look at this picture. All profiles are found in the Generic folder.
you use one Dimmer RGB then 3 RGB and then a single channel profile at the end. Make sense now? Sincerely,
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .