dmx op program 2 color fade?

BUUUUUUUMMMMMMPPPPPP!!!!!!!!^^^^^^^^^^

For the DMX Operator (and Pro) you need to make a scene with the white and a scene with the yellow. Then make a chase (hold the chase button down for 3 sec). Pick a chase to store it under (chase 1-6), then call the white scene, press Rec button, then press the yellow scene, press the Rec button. Then press the program button for 3 sec to exit.

Now press the chase you stored it under. There are 2 different settings, fade and speed. speed is how fast it goes from white to yellow. Fade is how long the transition takes. So you could have 30 sec on white, then switch to yellow for 30 sec taking 5 sec (fade) to change from white to yellow. You can make them match so its constantly changing (as soon as it turns yellow, it starts going back to white).

Im not sure if you need to be in auto mode or not. Its been a while.

--Kevin

umm i have the elation operator 192 with the joystick and it has 12 chase buttons. will anything be different? i will also have my performance scan doing a circle around my drums. so it should look like this: every other point in the 6 point circle i made will have white and the led on that same point will be yellow. so it's kinda like they go back and forth. any more ideas?