Broadcast with vms4

Former Member

Hey i'm on mac and i would like to broadcast my vms4 with traktor how can i do it, i've tried it on internal, with nicecast it work but i can't hear all channels, i'v also tried by the vms4 input (mic) and i have horrible distorsion all minutes.

Please help me.

8/29/1011:24 AM

❤️ 0

Original Post

Replies sorted oldest to newest

Former Member

8/30/1011:14 AM

❤️ 0

Former Member

what EQ mode are you in? If your in default open you manual and set your EQ to POST. Sounds like your distortion could be coming from to much signal. Only thing if you use the POST EQ you will need to map the knobs in traktor should only take a second. I had the same problem but with Recording distortion.

8/30/1011:21 AM

❤️ 0

Former Member

Thanx a lot i will try it, but where can i change the EQ please? and the knobs are already mapped

8/30/1011:27 AM

❤️ 0

Former Member

with your VMS4 off hold the #4 CUE button (cue all the way to the right) while holding turn on the unit for about 4 seconds. its on page20 in the VMS4 manual. Once you do this you will reduce the double signal your getting.

8/30/101:14 PM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...