Hello, i have an Adj Entour Faze haze machine (it works with water based fluid) and it is filled with the proper original Adj Haze Fluid water based (not oil cracker) .The haze machine it was bought new from the store few years ago and from the first time and since, the haze it produces leaves some white flakes on the surfaces and oily grime on the lens of the lights (especially on the led based scanners, not on the bulb (hmi) ones) .The oily grime on the lens of the led based scanners is more heavier when they are colder (read working outside on a dry cold weather, but as I said the bulb hmi ones are not affected by that) .All that being said, i don`t think it is normal for the haze to leave that white flakes on surfaces and oily grime on lenses (much more that it is water based heating procedure, not oil cracker vapour) .So, is the haze machine kinda broken? Is it not hot sufficent enough to evapour correctly the haze fluid or maybe the haze fluid is poor quality meaning that i had bad luck with the big bottle I`ve got (bad production batch) back then?
Original Post