BandHelper iPad midi to dmx

Hi! if you read the manual from the MyDMX GO product page, in it you will see a section on MIDI.
https://d295jznhem2tn9.cloudfr...%20User%20Manual.pdf

APP INSTRUCTIONS MIDI (iPad Only)
The effect buttons, preset buttons, flash buttons and sub master dimmers can be controlled by MIDI. This is a bonus feature and custom mappings are not currently possible. If you have a controller such as an Elation or Behringer controller, you can normally modify the commands the controller sends (refer to the respective user manuals for further info). To control myDMX GO via MIDI, you’ll need a Lightning to USB adapter.
The MIDI mappings are as follows:
Color Effects 1-8: Note 40-47
Move Effects 1-8: Note 48-55
Presets 1-8: Note 39-32
Presets 9-16: Note 31-24
Presets 17-24: Note 23-16
Presets 25-32: Note 15-8
Presets 33-40: Note 7-0
Sub master dimmers 1-8: CC 48-55
Sub flash buttons 1-8: Note 64-71
Master dimmer: CC 56
Strobe button: Note 56
Flash buttons 1-5: Note 58-62
TAP button: Note 63

I have it all Working now - I just needed to buy the pro version for photon2

Hi, I have photon2 controlling my lights on my iPad now.
Do you have a couple of examples of midi code from BandHelper , so I can start the next stage?
should I do this with raw sysex or create a patch called “blue lights” , “scene1” etc.?

Hi, I have photon2 controlling my lights on my iPad now.
Do you have a couple of examples of midi code from BandHelper , so I can start the next stage?
should I do this with raw sysex or create a patch called “blue lights” , “scene1” etc.?

Yes, I own it all. All set up now; all I needed space bar clicker to do was purchase Photon 2's professional edition.