We have 4 ADJ Quad Scan LEDs but when setting up scenes using the presets it only controls one head on each Quad Scan. Is there a way to include all 4 lights with presets?
Original Post
Replies sorted oldest to newest
interesting, profile looks correct which mode are you running them in? you are running MyDMX2.0 correct?
Yes, running MyDMX2.0 - I ended up making a new profile altogether to control each individual light through their 7 channels.
i will have to get one and troubleshoot it sorry for that inconvinence
Hi,
Any update on this, I have the same problem running on 28 channel mode.
I would rather use 5 channel to use the built in shows but I need the Pan & Tilt to go to the full range of movement and from the manual you can only do this in 28 channel, Also using built in functions should give you back individual Colour/Movement.
Could you over-ride Pan/Tilt on a 5 channel profile?
Any update on this, I have the same problem running on 28 channel mode.
I would rather use 5 channel to use the built in shows but I need the Pan & Tilt to go to the full range of movement and from the manual you can only do this in 28 channel, Also using built in functions should give you back individual Colour/Movement.
Could you over-ride Pan/Tilt on a 5 channel profile?