Hi!
I'm trying to add a circular movement to a moving head, the channels that control pan and tilt are 1 & 3, but when I try to generate through the effect generator applies it on channel 2 & 4 (which are for fine movement). How can I target channels 1&3 or how do I link channel 2&4 to 1&3?
Thanks in advance! 
Replies sorted oldest to newest
Hi, the effects generator should use the proper channel, the only time this happens would be if the profile was made incorrectly or theres a software bug. Can you tell me the name of the fixture you are using and what channel mode, as well as the version date of 3.0 software you are using and on Mac or Windows?
Thanks for the prompt reply! The fixture is a generic Chinese moving head, so I did the profile. I'm sharing you the profile if you have a chance of taking a look. I'm using Mac (12.4).
Did you use the online profile builder to make this or what did you use to create the profile?
I used the Scan Library to make this profile.
Hi, so the old built in editor is mostly discontinued and we don't use it anymore there is a new online based builder that is similar to the desktop one, i made some tutorials for it here: https://youtube.com/playlist?l...;si=s01a6munpShZzszx
you can make an account and sign up for it all here: https://cloud.lightingsoft.com/#/
You should easily be able to re-make the profile so it is correct and can be used correctly in the program. The issue was you made two sets of 8-bit pan and tilt, when you needed to make a fine channel. you can see the correct way in my videos on the new builder.
Thanks for the reply! I'll try that.
