Is there a lux output rating for this yet? And why isn't there any buzz about this new model?
http://www.americandj.com/Prod..._Lighting&txtSearch=
Original Post
Replies sorted oldest to newest
I don't believe we have the LUX report on these new models just yet. We will add it when we get it.
Sincerely,
Sincerely,
Wow I was really looking forward to selling my Vizi-Spots to upgrade, but there are a couple of reasons I won't be now.
They changed the gobo sizes, and I spent about $1200 on custom glass gobos, and they can't be used on these.
They made the beam smaller. 14 degrees is already pretty small, now it's 13 degrees.
And they got rid of the 5 facet prism.
I think I may just hack my fixtures with a brighter bulb
They changed the gobo sizes, and I spent about $1200 on custom glass gobos, and they can't be used on these.
They made the beam smaller. 14 degrees is already pretty small, now it's 13 degrees.
And they got rid of the 5 facet prism.
I think I may just hack my fixtures with a brighter bulb
I wouldn't be surprised if the regular version gobos fit. It is only .3 mm difference in size and there has to be a little wiggle room for slight size differences in gobos. The one thing you would lose however is viewing area and that seems to be a concern you have Stevie. With the smaller viewing area of the regular gobos, you will block more light in the Pro version.
Going from 14 to 13 degrees wouldn't be that much of a change however. Its very small change. Not sure why they got rid of the 5 face however.
Going from 14 to 13 degrees wouldn't be that much of a change however. Its very small change. Not sure why they got rid of the 5 face however.
I am not a fan of the infinity or "3D" Prism. I have one on my E spots and i want to replace it but i can't as the prism wheel is assembled as one piece. 
I agree. Give me back the 5 prism. I use that more than the "Infinity" Prism, which is never.
I do really like the Frost capability. That might be what gets me to upgrade.
I do really like the Frost capability. That might be what gets me to upgrade.
A quick question about the prisms on the Vizi Spot Led Pro. Can the prism be set to rotate at variable speeds, from stopped, very very slow, to medium, to fast etc, in both directions? or, is it a case of...Prism On, Prism Off...there's your three images, or not.
I'm guessing you can also rotate the gobo whilst using the prism effect, but I'm hoping to rotate the 3 facet prism at various speeds too.
I'm guessing you can also rotate the gobo whilst using the prism effect, but I'm hoping to rotate the 3 facet prism at various speeds too.
Yes. There is a prism rotation and index channel.
PRISM ROTATION & INDEXING
0 - 127 PRISM INDEXING
128 - 189 FORWARD PRISM ROTATION
FAST - SLOW 190 - 193 NO ROTATION
194 - 255 BACKWARD PRISM ROTATION
SLOW - FAST
That help? I have a vizi scan led pro but I could hook it up and see how slow it goes if you need?
Sincerely,
PRISM ROTATION & INDEXING
0 - 127 PRISM INDEXING
128 - 189 FORWARD PRISM ROTATION
FAST - SLOW 190 - 193 NO ROTATION
194 - 255 BACKWARD PRISM ROTATION
SLOW - FAST
That help? I have a vizi scan led pro but I could hook it up and see how slow it goes if you need?
Sincerely,
Thanks James the "how slow" would be useful to know... the scenarios I'm think of are during ballads/slow spots, and also for "wall washing"/"ceiling washing" during a dinner for example. Something like 6 RPM (10 seconds to perform a complete rotation) would be good - but slower would be better.
Does the Vizi Spot LED Pro use a CREE LED?