Setting up the P64

Former Member

Hello all,

I have just gotten a P64 LED fixture and I'm trying to get it set up. I have a Leprecon LP-X24 light board, and I've already set up the 'instrument'. What I can't seem to be able to find is how to set the DIP switches to set the beginning DMX address. If anyone knows how to set them, or has a diagram I'd really appreciate it.

Thanks.

6/30/082:53 PM

❤️ 0

Original Post

Replies sorted oldest to newest

JinglesForum Admin

Well what channel are you starting at for them?

Let me know if that helps. Sincerely,

6/30/084:10 PM

❤️ 0

Former Member

It needs to start anywhere after channel 165, so 166+. But, on the back there are only 8 switches, and the first one is to activate DMX mode. So, will that just bump the numbers back?

Like:
2->1
3->2
4->4
5->8
etc to:
8->64?

Which even if all of them are on that's only up to 127, so I guess I'll have to try and get it below our MAC 500s.

6/30/084:15 PM

❤️ 0

JinglesForum Admin

it doesn't bump them back. So just do the addresses like the pic I posted shows you the numbers. Welcome to the forums. Sincerely,

6/30/084:32 PM

❤️ 0

Former Member

Ok cool, thanks very much!

6/30/084:36 PM

❤️ 0

JinglesForum Admin

Wait is this an american dj par 64 LED? cause all fixtures that have dip switches should have minimum of 9. not 8. let me know wassup. Sincerely,