Yes and no,
what is happening is the Fx Generator is defaulted to a higher compression rate which effects moving heads and scanners that do not have a pan/tilt fine.... With the pan/tilt fine...the FX work correctly. If you are building scenes that end up only having two steps...you need to LOWER the compression rate on the effect this can be found by clicking on the little arrow just to the right of the “CHECK” mark that generates the scene… It is defaulted at 100%...you can go higher or lower Set the level lower, and the FX generator will make multiple steps and will work as desired. Future release coming out soon will have this already set lower
Original Post