Skip to main content

5 replies

Problem connecting my ledj 64 & 56 cans

FM Former Member
I'm trying to connect my ledj 64 & 56 cans to mydmx but not having any luck. I think I'm using the right profiles, it's a little tricky to tell.

I'm using the profiles under LEDJ. For the 64 I'm using profile "led64" and for the 56 I'm using ledj_par_can_56. Are these correct?

Does anyone know if the profiles are under Prolight or LEDJ? Or do they even exist and have to be made up?
Original Post

Replies sorted oldest to newest

FM Former Member
Just for those who may have encountered this problem like I did with the LEDJ LED64 & LEDJ LED56 par cans, I've solved the problem!

These units also require dip switch number 10 (as well as the dip switch configuration given by MyDMX for that unit) to be in the On position when being linked up to a DMX controller.

The profiles for these units don't show that dip switch number 10 needs to be in the on position so just bear this in mind when trying to DMX these units.

Add Reply

Post

Membership Required

We're sorry. You must be signed in to continue. Sign In or Register
×
Are you sure you want to remove from your Block List?
×
Loading...
×
When you block a person, they can no longer invite you to a private message or post to your profile wall. Replies and comments they make will be collapsed/hidden by default. Finally, you'll never receive email notifications about content they create or likes they designate for your content.
Note: if you proceed, you will no longer be following .
×
Link copied to your clipboard.
×