November Profile Request Thread.

even that manual that you made into a PDF is not enough to base a profile off of. Give me 2 days to see if i can sort this out.
Sincerely,

Jingles, I tried that profile and the others...They don't work.

Irradiant SRL-6005 LED56 7ch.

Manual: http://www.irradianthq.com/Use...%20User%20Manual.pdf

Manufacturer: http://www.irradianthq.com/?op...-par-cans&Itemid=129

Thanks,

Tim

quote:

Originally posted by Jingles:
I believe this one should work just fine for you.
http://db.tt/keJCJ1E
Sincerely,

tim i went to view the manual and the company page from the links you posted. Neither one worked. Take a look.

http://www.irradianthq.com/ind...atid=35:led-par-cans

is this the light tim?

5 DMX CHANNELS: RED, GREEN, BLUE, DIMMER, STROBE

Hey Shaun Thanks for the link. Yours works. This looks like the light Tim has. but it is 7 channels. Which are RGBRGBR. Tim the profile I sent you SHOULD work. Please verify that your fixture was properly addressed and in the DMX mode setting.
Sincerely,

Yes that is the light...I will double check the addressing later on next week to troubleshoot. Thanks

quote:

Originally posted by Jingles:
Thought I made that one. Which channel mode were you wanting? Welcome to the forums.
Sincerely,

Any luck with the Mega Tri Bar 12-channel mode?

Hi all !

Well this is my first post on this forum so treat gently please

I'm just about to buy MyDMX along with a couple of ADJ UVLED BAR16's - I've found a profile for all my lights and just need to know if this one is available anywhere ?

Many thanks

DJH

Rob my apologies. I'll get your profile to you on Monday.
Howie you can download your UV LED Bar 16 3 ch mode profile here. http://db.tt/lxEZAUV
Sincerely,

Wow ! - That was soo quick Jingles and at the weekend !!

Well, that's made my mind up.. MyDMX and 2x BAR16's are on the shopping list this week !

Seriously though... its that kind of service and forum support that can sway a buyer... and I'm sold !

Thx Jingles.

Doh !

I forgot to see if you know of a profile that would work with my lasers. Sorry, I can't find the manufacturer anywhere on the device or manual, but at least the manual gave me DMX info - result !!

http://dl.dropbox.com/u/15853861/HP_laser.jpg

Thanks again in advance Jingles !

H.

rob here is the mega tri bar channels 10-12 for 12 channel mode operation.
http://db.tt/iH4hrfR
so here is what you do. in the dmx universe grid insert 3 of the _generic RGb profile to get your 9 channels of RGb control then use one of the profile I have just linked you too for your channel 10 11 and 12 control modes and master dimmer. Let me know if this make sense. I sincerely apologize about the delay.
Sincerely,

Howie here is your laser.
http://db.tt/52SanMd
Since you do not know the name the file is called Howie's laser 7 ch. You now have a light named after you. Congrats!
Sincerely,

lol !

Thanks James... let me just revel in the fame for a minute.....

ok, maybe just a few seconds !

Thanks again - you are a star !

H.

Hey Jingles,

I'm helping a friend get a club set up here in our small town, and talked him into the MY DMX software. Then his invester talked him into buying cheap lighing from China, which doesn't have a profile inside My DMX. UGH! SO I have been trying to get them working for about a week before I broke down and now I am posting. Here are links to documents for both fixtures. I really hope you are able to gleen enough info to create a profile for them.

Thanks for your help,
Dallas

http://dl.dropbox.com/u/159863...ER%20648-5%20RGB.pdf

http://dl.dropbox.com/u/159863...ser%20Controller.pdf

The LED one is simple. The laser manual gave me a headache haha. I'll have to stare blankly at the laser manual a bit more.
Give me a day or so.
Sincerely,

Thanks a bunch bro! I just stared blankly at the whole thing. I could handle the ADJ equipment they bought, but not the Chineese stuff. Thanks for saving me on this.

Dallas

Hi, new guy here. Looking for a profile for Chauvet Trident did not see any . Can you help?

I JUST made this profile. Here you go: http://db.tt/EiOFVLD
Welcome to the forums.
Sincerely,

Thanks! A lot!!

Dj holliewood, here is the euro lite: http://db.tt/N5kDSIE
Sorry for the delay. I'm still staring blankly at the laser one. lol. give me another day for that one.
Sincerely,

also what's so confusing about this manual is it list dmx value but then there is a percentage symbol next to it. but dmx (hex)values are different than percentage values. lol so that is what's trowing me off. Are those actual dmx channel values or dmx channel values in percentage?
Also what's funny is the 39 channel mode chart channels 4-39 have Apr-39. but the funny part is April(Apr) is month 4 in the year haha! So do you want 3 or 29 channel mode?
Sincerely,

Hey Jingles,

Sorry about the "Apr-39," I had to created both these manuals from scratch. It is actually 4-39. But I am never going to want to run it in 39 channel mode as 4-39 are just on/off for each individual laser. The percentages now actually paying attention to what I wrote they look more like they are normal binary values, that represent much different percentage values. (1-7 would be like 3%)SO ignore the percentage sign. Sorry man, and thanks for taking the time to do this.

I will be controlling 4 of these with 8 lasers on each is how this config is looking like its gonna have to be laid out. I told him next time just buy all ADJ.

Dallas

So do you need me to make the 3 channel profile?

Yes sir. Just the 3 channel one will be perfect.

Thank you!

Dallas

Here is the 3 channel mode profile: http://db.tt/nWEto1m
This thread is closed. Look for the Dec 2010 thread in a bit.
Sincerely,