Skip to main content

I've had my mixer for just over 2 years now and to be honest it's been awsom. However I've not been on my decks for a few weeks but fancied a mix. When I came to power on my mixer all I get is a flashing power light. I have never come across this issue before and can't see that anyone that has. Any ideas?

Original Post

Replies sorted oldest to newest

Hi.

It was a problem with the power supply board.

I managed to get a new 1 but took me a while to find 1. And this was 6 years ago and the MXR10 had been discontinued for a while back then.

The new board held up until mid 2020 but then started with the same issue. After some sleepless nights searching the Internet and learning some basic electronics I found a capacitor had blown on the new board.

I swapped it out and all was well for a week or so.

This lead me to think there is a problem deeper in the mixer possibly on another board and this is blowing out the power board.

I gave up with it and bought a controller.

But if yiu use VDJ and change your mixer they won't transfer your licence over.

I have had a big fall out with them and moved to Traktor.

Wish it was an easy solution but Good luck and hope you get sorted with whatever you decid to do

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×