Good morning everyone, I created scenes in different groups moving head wasvh and RGBW moving head with 6x15 W laser beam, if I then switch to Live mode I activate the moving head wash scene, when I activate the laser moving head, the moving wash heads yes they position as off. I kindly ask you if you can explain to me where I'm wrong.
Replies sorted oldest to newest
Hi, I would cross reference the DMX values of the fixtures on both scenes to ensure they are set correctly AND make sure that if you're goal was for separation of control, that either scenes does NOT include channel data from either fixture in either scene, because if they do, then the last clicked on scene will take over the previous scenes data if there's a conflict.
As a note, the channels must be set to "OFF" underneath it's fader for it to not be included in any scene that is selected, if the channels is "ON" but at 0 value, that 0 value will be present in that scene.
Thanks for the reply, I'll check what you told me and update you.
Good morning Gingles, thanks for your advice I solved my problem. Thanks again
