So I just received 12 jolt panel fx’s. I’m doing testing and creating my layout views and such, but I noticed when I power cycled the fixture the mode switched from 141ch mode to 6ch mode. I have only tested 1 fixture so far. Is there a hidden setting im missing that can turn that off?
can I push back the firmware?
Replies sorted oldest to newest
Hi, the default channel mode for this fixture is actually the 18ch mode, so are you sure you are hitting enter and then backing out of the menu to save your selection? also you do not have anything with RDM connected to the DMX ports or DMX line right? These lights do have RDM and that can also be used to change settings remotely. Let us know, thanks!
Hello yes I’m aware the basic default is the 18ch mode. When the light is powere cycled on the 141ch mode it goes to the 6ch mode when booted up. It only happens with the 141ch mode for me on all my new fixtures
Hi, that's very odd, can you tell me the firmware version as it shows in the menu? I will have our R&D team look at this.
1.2 and thanks
Ok. I think you are also a working with Luis about this over email? For the sake of not having too many techs working on this I would just defer you to work with him and that team. They can help you.
Yes and thanks!
