Hi
Is it possible to change scenes on the stand alone dongle without it being hooked up to a computer?
Also what functions can i change using the dry port switching, ie, Scene up/down, pause, etc. And finally, what switches do people use to switch scenes, ideally i'd like to use a foot switch of some kind?
I'm hoping that if i purchase the Dry Port switching, that all instructions of programming it and switch connections are supplied?
Many thanks
Replies sorted oldest to newest
Hi Andy, I think you have asked this elsewhere, but i was looking into it and got side tracked, so here is the best answers I can come up with for you.
The short is Yes, it will work.
The long answer is it is a paid upgrade you may need to purchase for your interface and it does require a bit of a set up process, but it should work.
all the info is in the manual under Dry Contact closure/Ports triggering.
https://d295jznhem2tn9.cloudfr...UAL%2002-18-2022.pdf
Not many of us have done it ourselves in the office, Also the MyDMX RM does exactly this, and is pre-built for you basically.
Thanks for the quick reply. I did previously ask if this was possible, but thought i'd might not of made myself clear in my question?
I'm happy to pay for an upgrade if it works. I could make a foot controller. Is the switching basically just an on/off momentary contact switch that tiggers an operation in the dongle. And i'm guessing the functions would be limited to inc/dec scene changes, maybe pause and blackout? Which is totally fine.
As i working guitarist without roadies or staff, being able to run my stand alone dongle that has my light show on it, using a footswitch to trigger scene changes is a perfect scenario.
Many thanks
Andy
Hi, you'd have to pay for the upgrade to test it first, but of course if it doesn't work i would assume the webstore would refund you or assist you in getting it working.
Yes, it is mostly a simple press on/off for it to recognize, but all info for it is in the manual i linked.
Thank you Jingles8302 
