DP-DMX4B Dip switch settings

Former Member

Hello. My band has recently purchased a Behringer Eurolight LC2412 light board. Reading through the manual, it SHOULD be compatible with the (2) ADJ DP-DMX4B we currently use. There should be a way to set the dip switches on the dimmer packs but I don't know how to find which settings I need. Can anyone help? You can email me directly at psychomycho@yahoo.com

7/21/078:44 AM

❤️ 0

Original Post

Replies sorted oldest to newest

sergiocMember

The Dp-Dmx4b has to be addressed to what the controller requires. Find out what channel you need to set and use the link below for a dmx chart that'll show you any dipswitch settings for channels 1-512.

http://www.americandj.com/pdffiles/DMX%20Chart.pdf

7/23/079:38 AM

❤️ 0

Former Member

Sergio, thanks for the info but how do I find out what settings I need to begin with? Kinda new at this.

7/24/075:57 AM

❤️ 0

sergiocMember

ksmusicman,
If the Dp-dmx4b's are the only thing hooked up to the board then it should automatically start off with channel 1.

7/24/078:29 AM

❤️ 0

Former Member

Sergio, thanks for all your help. I'm assuming that if Channel 1 says "1", then that means only that switch should be on and the others in the "off" position? Do I understand you correctly?

7/24/0710:09 AM

❤️ 0

JinglesForum Admin

yes so far that os correct. do u need help with dip switches and their repsective values?

7/24/0710:29 AM

❤️ 0

Former Member

Hey Jingles, yea, any help would be appreciated. What are your thoughts?

7/25/076:15 AM

❤️ 0

JinglesForum Admin

ok so it goes like this ok:

dip#/dmx value.
1 = 1
2= 2
3= 4
4= 8
5= 16
6= 32
7= 64
8= 128
9= 256
understand? so if i wanted an adress of say 53 i need dips 1,3,5,6 on. make sense?

7/25/079:14 AM

❤️ 0

Former Member

Jingles, Hey thanks. We were able to get some channels assigned out and get things working again. Thanks for all your help.

7/26/0710:46 AM

❤️ 0

JinglesForum Admin

no problem!

7/26/0712:35 PM

❤️ 0