I had 4 p64 Led and one chavet Elan working off of an DMX operator. No problems. I bought 4 Dynasty scanners yesterday I took 1 and hooked it in to my system. Set the address. I can control it just fine. The only problem that it causes the other 5 lights in my system to randomly flicker. 1 will flick on green 5 seconds later one will flick on red. Very random.. no pattern. I have been told to get a termination. Got it, put it on same problem. I have tried all 4 of the scanners with the same exact problem. I swaped cables around. I have redone all the addressing several times trying different addressing each time. I have tried scanners first in the chain, last in the chain, in the middle, alternating scanner and P64. I have All DMX cables not Mic cables. I am at a loss and I have talked to no less than 34 people about this. Scoured the internet with no help.. Anyone that could help me I would be very happy with you. Virtual High 5 to the first that can help. Thanks for you help in advance.
Frustrated DJ Obone
Original Post