dj accu scan 250

Former Member

i have 4 accu scans in a nightclub. i have all of them linked together thru dmx. all the functions work on all of them individually. i use an elation controller. one of the scanners doesnt stay where i programmed it to be in the chases and scenes and the other 3 do. what can i do?

7/2/083:18 AM

❤️ 0

Original Post

Replies sorted oldest to newest

JinglesForum Admin

Which controller are you using? and are your scanners addressed individually? Welcome to the forums. Sincerely,

7/2/0811:28 AM

❤️ 0

Former Member

i am using the operator 920. i have all of them addressed individually

7/3/082:32 AM

❤️ 0

JinglesForum Admin

the dmx op 192?

7/3/084:32 PM

❤️ 0

Former Member

yes thats the one. i figured it out. the mirror was scraping against the focus lens. i had to screw the lens in all the way down for the mirror to clear which makes the gobos unfocused. on another accuscan, when i turn it on it makes this noise for a while with no display. after a while the displays slowly comes up. then it will work fine all night. any idea whats going on?

7/15/082:06 PM

❤️ 0

JinglesForum Admin

ok well then i suggest you call our service department. the number is listed on the ADJ homepage. Sincerely,

7/15/082:20 PM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...