I thought this would be pretty easy. This is my first forray into the DMX world & I'm having trouble getting this to work as expected.
(2) ADJ Mega Flash DMX
Chauvet DMX-40b
The DMX-40b blocks off the 12 scanners itself x 16 channels, there is no programming.
Fixture 1 = address 1 = channels 1 - 16
Fixture 2 = address 17 = channels 17 - 32
etc etc
They are correctly addressed (1 = 1, 17 = 1,5) via the dip switches, but if I select fixture 1, fader channel 2, I can NOT control the speed. (EDIT) Dip #10 is on & I've got the DMX LED indicator blinking.
I've read/re-read and then read again the manuals. Nothing seems out of place.
Here is my layout:
[Chauvet DMX-40b]
|
[ADJ Mega Flash @ #17]
|
[ADJ Mega Flash @ #1]
|
[DMX-3F @ #33 (DMX Fog adapter)] - - - [Chauvet F-1050]
|
[ADJ MB DMX @ #49 (eventually)]
Standard 3 pin XLR, the 40b has a polarity selector that is set to the same config as the Mega Flash.
Original Post