Skip to main content

Hi, the instructions for that remote are in the User manual for the light that supports it. So if you have a light that works with it, the instructions are in it's user manual.
But in the specifications area for the remote on the website, this is pretty much the gist of it..  https://www.adj.com/adj-led-rc2

  • Includes Red, Green, Blue, Amber and White LED control
  • Wireless infrared remote control up to 15 ft/45M
  • Black Out: Turns fixture On/Off
  • Program Selection: Access units built-in programs
  • Flash: Strobe effect mode
  • Speed: Activates the speed control of programs
  • DMX Mode Select
  • Sound Active: Activates sound active mode
  • Secondary: Designates the fixture as a “secondary” fixture in the Primary/Secondary configuration
  • Set Address: Set DMX Address on a fixture
  • RGBAW Buttons: Adjust RGBAW colors with the “+” and “-“ buttons
  • + and – Buttons: Adjust flash rate speed, program speed, sound sensitivity and program selection

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×