I have 4x of these TWIN units (not singles). I was doing a large event and was up on quiet a tall stage, so placed all the moving heads along the front of the stage, the correct way up standing on their own feet. I had them all linked master/slave and each one powered in and out via IEC daisy chain. The master was on Programme No.3 front facing across the dancefloor and the slaves were all following suit. Half way through the night, one of the fixtures failed. Totally no power at all to one of the units, resulting in 2 moving heads being dead. Nothing at all on the LED display and even when put another power supply into it, still dead and no alignment sequence of the heads. Even though the the fixture was the 2nd in the linked chain the other fixtures where still able to receive power as well as the DMX signal from the master fixture. So in turn it had no effect on the other lights. I thought it was probably a fuse blown or something. I had a look at it this afternoon. Still dead. Swapped the fuse with one from a working fixture and still dead. Something internal I'm guessing has gone. Power supply ? Internal Transformer ? Looks like I'm gonna have to take it to my local DJ shop (4DJs Birmingham, UK) (where I am based) for them to have a look at it and possibly order replacement parts if needed. Just strange how one min its working fine and then just cuts out. I have reviewed videos I took through the night and it was definately working and in sync as it should be at the start of the night. Any ideas of suggestions please. Thankyou
Original Post