ADJ Element Hex IP

Hi everyone.

I have an ADJ Element Hex uplight.

The uplight works only when connected to a power supply..

However when I press LOAD OFF and disconnect the power I am then able to navigate around the uplight with no problem. Battery shows b100.

When I then press LOAD ON THE LIGHT JUST SWITCHES OFF AGAIN AND WILL ONLY SWITCH ON WHEN RE CONNECTED TO A POWER CABLE.

DOES ANYONE HAVE ANY IDEAS?

3/19/222:15 PM

❤️ 1

Original Post

Replies sorted oldest to newest

Jairo YepezMember

I have the same problem too!!!! and there in perfect condition , I wish knew what’s was the problem to have it fix ☹️

10/21/227:49 PM

❤️ 0

Luis (Support)American DJ

Hi,
Do the display on these lights turn off, as well, when the battery switch is on?

10/24/222:48 PM

❤️ 0

Jairo YepezMember

No I have then on the display, is the hold light, it only works when connected to a power supply, without the power supplies, the element is dead, I change the fuse but still no powered

10/24/223:15 PM

❤️ 0

Luis (Support)American DJ

And this happens even after you charge the unit for several hours?
Please e-mail us at support@adj.com with more details and serial #s of the fixtures that you are experiencing this issue with.

10/25/229:47 AM

❤️ 1

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...