Skip to main content

Replies sorted oldest to newest

foud out how to map torq 2.0 with VMS4 all you do is select the number of decks you wan to use an right click like in play in your screen an press the coresponding buton or knob in vms 4 and it will map that to the controller and i got mine working. its quite simple.no jog weel asigment or lights (only cue lights)thoug but its ok. if somebody get the play cue or the loop ones to light up please explain how you did it. thanks.
quote:
S4 all you do is select the number of decks you wan to use an right click like in play in your screen an press the coresponding buton or knob in vms 4 and it will map that to the controller and i got mine working. its quite simple.no jog weel asigment or lights (only cue lights)thoug but its ok. if somebody get the play cue or the loop ones to light up please explain how you

Hello

To get led`s light is possible but not undifficult:

U Need the vms 4 midi table pdf (download here http://www.vms4dj.com/downloads_uk.html

The IN Numbers are valid for the Inputs of the VMS (lights) from Torq 2.0 beginning from site 10 of the PDF

set torq to prefs /midi/controller prefs
Choose VMS4 audio midi device on the top of the window
highlight only the outputs format by clicking on the other fields (output & deck 1 for example)
choose new output....
new output appears - now click on the field beside path:choose your desired funktion (examle: engine /deck1/transport/Play
click apply in the right corner
Now: Midi message - set to on/off - then , type in field Note cc index number 13(f . e) for the left play led
and so on.....
on the top of the fieled you can export and soo save your setup....

that,s my way
sorry for the english , im from Germany
Last edited by Former Member

Add Reply

Post
×
×
×
×
Link copied to your clipboard.
×