Profile Request: AD Matrix Beam LED in ssl2

Hi tmac, please download the .ssl2 file from this link: https://www.dropbox.com/s/p344...ix%20Beam%20LED.ssl2

Then find the mydmx2 folder on your computer, then scanlibrary, then place the file into the ADJ folder then you can patch it in and start programming.
Let me know if you have any further questions.

Thank you very much!

You are very welcome.

Oops. This is the one I have already.
This is a single channel. Controls shutter and a couple macros only.

Can I talk you into making me the four channel mode profile? Pg 16 of the manual. I will email the manual to you if you need me too.

Thanks for any help you can give me. Gig Friday!

Tmac

This profile has all channel modes in it by way of selecting mode 1 or 2 or 3 yes? Let me know.

James--

I do not believe so. I think this is the 1 channel profile only. I am trying to run this in Lumidesk Utlimate. When I patch it takes only one DMX channel. When I activate the fixture on the workdesk, it has only shutter on/off and a couple macros. There is no mode choice.
PS I am an ADJ customer and use almost all ADJ fixtures. I have been able to find and use all other ADJ profiles on Lumidesk (with multiple channel control)without problems.

Thanks for PROMPT REPLIES and sticking with me on this!

TMac

James I have the 4 channel profile for this fixture in ssl1. If a 4 channel profile in ssl2 needs to be created, would it help for you to have it in ssl1? I can send it if so.

When i open up the profile in the creator, mode 2 is this: https://www.dropbox.com/s/2tf888ik8ibrz1q/modes.JPG

Is this not what you need?

James-- I opened in creator and deleted mode 1 and mode 3 and re-saved the profile. This worked. I have what I need. Thank you for your prompt responses and helpful information on all issues. TMac