I have had 4 Inno spot LEDs for about 6 months now and I decided to Have a go at DMX control. I am a total DMX virgin and really could do with some help. I bought mydmxbuddy and downloaded (throughADJs site) MyDMX2. I managed to get the heads hooked up to DMX and the software a couple of months ago but there I wasn't sure what I was doing to be honest so they went back in the box up till now. I have plugged the head in and hooked up the MyDmxbuddy interface. When i open the software it goes from Demo mode to Express mode and I have chosen the make of the head in the drop down menu and patched in the fitting and set the address on the back. Ive been through all the tutorial vids and done exactly what people have suggested.. For some reason when when i plug the lights in it doesn't seem to pick up a dmx signal?? The light is just stuck on sound to light. Spinning round slowly doing its own thing..I have tried everything to get it to pick up DMX signal. The first time i tried as soon as i plugged the light in the red DMX light on the back of the fitting name on and it was responding to the virtual faders on the software.. I maybe doing something really stupid here but any advice would be massively appreciated.. I am about to launch the whole lot down the road.. So FRUSTRATED.. Cheers
Original Post