New Profile Request thread.

Having a problem with the profile for Chauvet Colorsplash Jr. Color channels are labeled wrong. Example Channel 1 does nothing Channel 2 is supposed to control red but , instead controls dimmer. Channel 3 is supposed to control Green, but controls red. Channel 4 is supposed to control Blue, but controls Green. Channel 5 is not supposed to control anything, but controls blue.

Hmm sounds more like an addressing issue. Wait. Chauvet has added an extra channel without telling anybody. Double check the address and I will double check the profile.
Sincerely,

The color splash jr's use 5 channels. Not 4. Add a blank channel for chan 1 I think....and all will be fine.

Like i said, Channel 1 is blank, so it throws the profile out of wack by causing the red channel to become the dimmer and so on and so on.

No he means add a 1 channel profile where needed. U can add a generic dimmer profile found in the generic folder.
Sincerely,

That just sounds stupid. Sorry, no offense intended.

I can't find a manual or even the product on the Chauvet site, which is also stupid. Sorry, but even as a Chauvet customer, I grow increasingly frustrated by this company. I found a manual elsewhere.

Now, without having one of these to test with, WHY would the profile have 5 channels? The manual states it is a 4 channel fixture. So, what we're saying is "1st channel is unusable, move everything else up 1 channel?".

Is this some sort of problem with the design of the fixture?

No wonder ADJ has issues making new profiles for their lights. The company making them can't properly write manuals. Without buying one, how can they be sure. Ugh.

This just helps me re-affirm my decision to stick with ADJ products.

I couldn't find a generic profile that would do what I am looking for.
I need channel 1 blank channel 2 dimmer channel 3 Red Channel 4 Green and Channel 5 Blue

Thanks for your help. I appreciate it.
I found your You Tube Video on creating your own profiles and have created a 5 channel profile with the software.

Yeah it is stupid. I bought my splash jrs about a year ago, and had to figure out the problem with the help of youtube users.

The channel 1 is a "future" channel. I don't think there is much else that fixture can do though.

CMBDJ:

Well, we're certainly in agreement over that.

Personally, after reading the manual, they should use channels 1,2,3 for RGB respectively, 4 for the FX stuff and 5 for dimming, instead of putting FX and dimming on the same channel.

Someone provide me a listing of the channels and the real specs for this fixture here, via IM or via my "contact us" form on my web site and I'll see if I can add this blank channel into this fixture. The main thing is that I want to be sure where the blank channel is as I don't have time for a while to dive into YouTube videos. I'm currently involved in preparing for being sued(credit card crap) and doing lots of video transfers that must be very closely monitored.

So, if you guys save me time, I'll go do it ASAP once I have the information and save you the time right back IF I can figure it out and will make it available for download on my web site.

I've made several profiles for other fixtures that I own from Chauvet. This is not because the lights were not matching their DMX charts, but because the ones ADJ provided(or did not provide) were not complete, accurate, or existing. Case and point is the Q-Spot 150. It has multiple modes, so I had to make profiles for each mode because ADJ only provided for one mode. My Intimidator Colors? Didn't exist. My spots by them? Same deal, didn't exist.

But I agree with ADJ's policy. Support YOUR products first, everyone else secondary. What I think I've heard rumors of is that ADJ is trying to figure out some what to make a site or forum specifically for profile sharing. I'd do it myself but I don't have time to research such an app for my web server.

Future channel. Seems once lights hit the production line, that's often it at this level. I have heard of firmware upgrades for consoles, but not fixutres. Theoretically it's possible, just I've never seen fixtures get updated firmware. ROMS are cheap. EPROMS, comparatively speaking, are significantly more expensive and have a higher chance of failure, although this chance of failure is in my experience close to nill. I've never had an EPROM fail on me yet.

Give me an address and I'll email the profile to you.

I have the existing profile, I examined it last night when I was reading this thread. That is, if you're talking about the one that currently exists in the MyDMX library.

Any "specs" or mods, let me know.

My first name @ my domain will get to me.

"chris AT studio42 DOT com" is valid, but be warned I have my server heavily spam shielded. So, if it boucnes, don't take offense, try the "Contact us" link on the web site. last I checked, it is working.

CMBDJ:

Thanks for the file. I have it, but I haven't gone over it yet, I'm just slammed. I did throw it on the web server.

If anyone wants the file, it is at:
http://www.studio42.com/mydmx/

There is also the Vista 64-bit patch files up there too.

While you're there guys, could you all juts abuse the rest of the site and pretend to be interested? Thanks, I'd appeciate it.

I found a profile for Chauvet Vue VI which is close to Vue 4.1 . But is there a profile for the 4.1 anywhere.

Thanks
Russ

Chris. your file for the chauvet splash jr is a SSL2 file. How? I tried opening the ssl2 file in my library editor and it says critical problem. Who created this profile or did you add the 2 at the end of ssl?? Let me know as to me ssl2 is for the next gen profile creator.

Sincerely,

I need profiles for MyDMX for the new ADJ Fusion Bar FX 2 and FX 3 (and I am sure someone will need the 4)

Thank you.

i got the third one made. i will make the others today. Check your inbox by the end of the workday.
Sincerely,

Hello there,

Like Synimagic, I need profiles for the ADJ Fusion Bar FX 2 and 4.

Thank you very much.

Hey welcome to the forums. I have yet to make number 4. But you can expect them both in your email inbox by the end of the day.

Sincerely,

Could you create a profile for the Chauvet Vue 4.1

Hello, I am in need of a profile for the ADJ revosweep please. I did not find it in the list that came with mydmx. thanks

The Revosweep profile is in the latest ADJ profils that are a sepparate download.

As far as the Chauvet Fixture, I do not see a profile labelled as a Vue 4.1 in the latest Chauvet Profiles. Looks like someone might have to do some overtime to get that one done due to the visualizations! I'm sure a profile could be done, but the visualizations might be the problem. Other than that little issue, I don't see the rest of it being an issue.

Hi, having trouble finding profiles for the following lights, any help would be greatly appreciated,

1. KAM LED PAR BAR Set,
2. ACME Visio Color Fusion CF-805
3. Acme IncredibLED
and finally
4. Equinox Nebula Cluster Laser

i havnt yet bought the USB controller yet, but itching to do so, just need to know if i can get profiles to make them work with MY DMX.

many thanks

Yes you will be able to get working profiles once you purchase my dmx. All you will need to do is send me the pdf manuals that contain the dmx traits for each light and i will make them.

Sincerely,

i need a profile for :

eliminator e-114

mrjoshuastudios at yahoo dot com please

thank you

JT Simmons

Ci how bout giving me a direct link to the product that way i don't have to go searching through the whole product line? Thanks.
Sincerely,

Hi Jingles:

I have a laser product that I just purchased that I would like to use with mydmx. Can you make a profile?

Here is a link to the fixture and dmx channels:

http://www.runmark.com/ebay/160MW RGY Twinkling Laser.doc

Thanks: James info@michigandjservice.com

Link does not work.

quote:

Originally posted by Jingles:
Yes you will be able to get working profiles once you purchase my dmx. All you will need to do is send me the pdf manuals that contain the dmx traits for each light and i will make them.

Sincerely,

Hi jingles, thanks i have just ordered the kit,

cant seem to see your email address, so here are the links to the PDF's if that helps

1.http://prolight.co.uk/images/media/11/1116/1116100/EQLA07/EQLA07-um0.pdf

2. http://www.lifeismusic.co.uk/S...6d6-e5169ba8540c.pdf

3. http://www.kam.co.uk/media/fil...ar_web_manual_v2.pdf

4.http://prolight.co.uk/images/media/11/1115/1115104/INCR01/INCR01-um0.pdf

on the visio color fusion, just need 9 0r 15 channel operation,
many many thanks,
my email is info@imageworksstudios.co.uk

hi
can you please help me i am very new to the lighting scene and i have just bought mydmx usb interface
along with revo sweep which when i try find it on the software it just shows as a 3 ch and i can only access the 28ch if i use the mega pixal 28ch which then only gives me red blue and green with no white
i als have bought kam dmx star cluster 3d which i cant find either it would be very helpful if you can send instructions on how to set these up
thank you
kevinpawson@hotmail.com

Ken and image i will have all your profiles bone by the end of this weekend. sound good? if anyone needs a rush on them let me know.
Sincerely,

quote:

Originally posted by Jingles:
Link does not work.

Oops.. Lets try that Link again.

Jingles- I would be very grateful for a profile for the attached laser.

http://mistdetroit.com/laser.doc

James
info@michigandjservice.com

Hi Im new here and i need a profile of WEINAS ML336 MOVING HED LED

Tomic Welcome to the forums. If it is not a ADJ or Elation product I will need you to link me to the PDF manual for the light so I can get the DMX traits and make the profile.
Sincerely,

quote:

Originally posted by Jingles:
Hey guys and gals. i am making a new profile request thread, the other one was 9 pages long and getting a bit confusing for me. SO...... Whoever has not received any profiles from me that they requested please say so here. Also if anybody needs one made Post here aswell.
Sincerely,

hi can you please help me i am very new to the lighting scene and i have just bought mydmx usb interface along with revo sweep which when i try find it on the software it just shows as a 3 ch and i can only access the 28ch if i use the mega pixal 28ch which then only gives me red blue and green with no white i also have bought kam dmx star cluster 3d which i cant find either it would be very helpful if you can send instructions on how to set these up thank you kevinpawson@hotmail.com

i will email you those profiles later today. if you need help as far as setting up the profiles in the software the instructions for that are in the user manual and also available on the my dmx you tube channel.
www.youtube.com/mydmxtech

Sincerely,

imageworks for the Cf 805 What channel mode do you want? Let me know so i can send you your profiles. Sorry for the delay.
Sincerely,

quote:

Originally posted by jwill00:

quote:

Originally posted by Jingles:
Link does not work.

Oops.. Lets try that Link again.

Jingles- I would be very grateful for a profile for the attached laser.

http://mistdetroit.com/laser.doc

James
info@michigandjservice.com

Hi Jingles:

What is the status of creating the profile requested above?

Profile sent to the email account you used to register on this forum. Sorry for the delay email me back When you have received it.

Sincerely,