MyDMX routing

It doesn't matter where they are in the circuit. They interpret the signl based on the address they are assigned.

Ok the only reason I ask is I used the led cans with the 2 250II's and they would go off program.

Then that sounds like a termination issue. If your cans don't self terminate you'll have to order a terminator. They aren't expensive. If your 250s self terminate then you could put those last in the chain and see if that works.

fortconspiracy

I was using a terminator at the end of the chain, I stopped today and talked with our local sales place. He was thinking maybe a cable, also going to try a splitter unit. A friend of mine has one I can borrow