MISSING PROFILES OR NEED ONE MADE??

Jingles:

I've discovered that when I plug in an accuspot and activate the rotogobo, the fixture does respond. It just doenst show up in the 3D Visualization screen. Ive also noticed that some of the gobos are different. I think I can fix the gobo design. I cant however do the 3D visualization screen. Not sure if there is a fix to it.

Ill touch base if I need further assistance.

thank you,
DJ Brew

i need the tri phase profile please

I am having trouble finding any DMX Traits for the ColorKinetics ColorBlazes. They are not on the list that is in the MyDMX list and I can not seem to find a manual. Anyone used them or know the channel parameters?

Hi there again Jingles, I still have not had an e-mail for the Acme Inflection scanner prfiles. Is there something else you need?

Hello,

I've purchased ADJ MYDMX today and was really looking forward to getting on with learning it today but I have come up with some problems.

Firstly, I can't find ADJ Mystic LED in the list at all.

Secondly, and more importantly... I have 8 x LEDJ Colourburst units which are Par36 4 Channel lights. I searched around this forum and others and also watched the YouTube videos on how to get started and also how to add a new fixture but I am not having any luck right now.

I add the units (I've tested 2 out for starters), but nothing happens. I put the dip switches as recommended in the right hand corner of MyDMX but the units are off. When I use the sliders, nothing happens!
Another user on the MDD forum has sent me a .ssl file and says it works for him but I am not having any joy.

Can someone help me please. My email is gary_cee@hotmail.com

Many thanks, it looks a great piece of kit!
Gary

I need a profile for american dj X-scan

Hi All,

Names Quinney and am a mobile DJ in the UK. Just purchased MYDMX and finding it really good and very easy to use.

Just after a fixture if anyone would be so kind. Its for a KAM120 Laser

http://www.kam.co.uk/media/fil...120_web_manual_2.pdf

Regards



Quinney

Welcome to the forums. i will make this profile and it should be done by the end of today.
Sincerely,

Thats great much appreciated. Have a couple of other fixtures too but will have a go at following the video tutorials to do them myself.

Regards


Quinney

Profile all received. Lots of thanks for your help.

Regards


Quinney

Hi can you help me Jingles I would like three profiles made up the first is for the LEDJ Stratos Spot panel from Prolight 6ch
The second is for a LEDJ RGB Spectra Batten 12ch and the last is for a laser which is a Laser-UK Club Scene tri colour laser show systemI have all the DMX chanel settings if you dont already have them.
I did create a profile for the Stratos panels but the macro/strobe/sound to light and colour mix fader dont seem to do anything. Also I have created profiles for the LED battons but whene displayed in the 3d viewer they dont seem to light up.
All help welcome I am happy to send you the profiles I have created maybe you could tell me where I went wrong.
Regards
Mike

Hey guys,

I've just bought this great software package, along with 4 ADJ Led Par 36 spots, and a ADJ Flash Shot Strobe. I already had a Quad Gem, so my living room is pretty much taken care off
First, my compliments for this great software, its AWESOME!

Here's my problem. I cant find a profile for the Flash Shot DMX Strobe, can I use the one for the ADJ Mega Strobe, or should I wait untill ADJ creates one? Thank guys!!

@ dj mike. Send me what you have and ill make them.

@shugga: I'll make that profile for you quickly. it is a simple profile.
but i encourage others to learn how to make profiles or at least be able to modify them.
check out the instructional video: http://www.youtube.com/watch?v=UO1Swkfll9I
sincerely,

@Jingles, thank you VERY much, Ill be sure to learn to do it myself from now on, so I wont have to hassle you guys anymore

no its not like that. its part of my job but if something ever gets screwed up down the line you should be able to figure it out. If you need help let me know.
Sincerely,

I've tried to create a profile for my Prolight Equinox Nebula but failed. Would it be possible to have one writen. I can give you the link to the user manual from Prolights website if need be

Many thanks in advance

CRaig

Sure email me at James k at American Dj DOT COM.
Sincerely,

quote:

James k at American Dj DOT COM

e-mail sent many thanks again )

I'm interested to see what i've done wrong

Craig

Hi all,

First post and a brand new user of myDmx. Does anyone have a profile for an FXLAB Circ7 LED light?

Many thanks,

Mark

I'm gonna need more info than that if you want me to make a profile for ya. haha. Welcome to the forums. email me the PDF or the web link to the pdf and ill get right on it. email is james k at american dj DOT COM.
Sincerely,

Hi James,

Thanks for responding.

I'll have to scan the manual in the morning when I get back to work.

I will email to you first thing.

Thanks again.

Mark

Hi James,

Email sent.

Regards,

Mark

Hi.

I need a fixture for the ACME MiracLED Light.

The manual is at the following address :

http://prolight.co.uk/images/m...IRA01/MIRA01-um0.pdf

The DMX channels are on page 3 for the channel names and page 8 for the DMX 512 values.

Thanks for your help.

Hi James thanks for the reply I have been away so very slow in my return post I have sent an email to you with the profiles I created and also the Manuals in PDF form as for the laser I have sent you a seperate email I am not shure if you can create it but heres hopeing.

quote:

Originally posted by Jingles:
@ dj mike. Send me what you have and ill make them.

@shugga: I'll make that profile for you quickly. it is a simple profile.
but i encourage others to learn how to make profiles or at least be able to modify them.
check out the instructional video: http://www.youtube.com/watch?v=UO1Swkfll9I
sincerely,

I need a fixture profile for the 46HP LED. Any help would be greatly appreciated.

Go here http://www.americandj.com/Prod...Category=DMXSoftware

And download the "New American DJ Profiles" link and there you go. your profile is in there.
Welcome to the forums.
Sincerely,

I've never done this before so I need a bit more help. I downloaded the profiles but then when I went to import it Light Jockey didn't recognize any files in that folder as being .udo or .udf files. Do I need to re-save the profile as a .udf file somehow? I can't find a program that will open this file. Any advice?

What you will need to is contact Martin and have them create the profile for you. The profiles on the American DJ website are only good for the American DJ software.

Oh. I spoke with someone at american dj tech support and he told me that there were people on this forum who made profiles that were compatible with martin light jockey. Is that not true?

No one that I know of has access to the Martin profile creater. So unless there is someone that has it Light Jockey that also has are software that is able to create that for you I would suggest giving Martin a call. I do apoligize that someone told you to come to this site.

Hi. We have just recently purchased My DMX and would be most grateful if you could help us with some missing profiles, if at all possible.

Acme Genesis LED Moving Heads
Skytronic QTX Light LS01 Laser
Prolight Color Fusion LED Panels

Any help would be really appreciated. With kind regards and many thanks.

i need PDF links to the dmx traits of these fixtures. Thank you. BTW how soon do u need these?
Welcome to the forums.
Sincerely,

I tried to create a profile for the Chauvet DerbyX and failed miserably. Does anyone have one???

Ya I do. I will email it to you. I can get your email from your profile. Also please do not double post same profile request. I will remove your other thread. I understand being new, its ok. check your email soon.

Welcome to the forums.
Sincerely,

Can I get one made for the Fusion-FX-Bar-3?
If you need my email...let me know.

Thanks.

The fusion FX bar's are not out yet.

Sincerely,

Really? I just got a quote on one Friday. Are you sure?

You are correct to a point. My salesman said this..
"They are still awaiting their first shipment, which has been delayed.
They were expected to already be in stock at this time. Currently, they are set to receive them towards the middle of the month from what our contact at AMDJ just informed me."

Well i talked to my go to guy at adj and he said july. BUT i will make the profile and email it to you. but keep in mind the 3D wont replicate what is actually going on due to how these lights are designed.
Sincerely,

Excellent and thanks!
bobbydroberts at yahoo dot com