MISSING PROFILES OR NEED ONE MADE??

I, too, need the the Chauvet COLORstrip profile. Could you email it to me please?

ill take a crack at this. but you wont be able to see it in the 3D. is that ok? if not may have a work around for you on my dmx. sincerely,

email me james K AT american DJ DOT COM ok? il get it to you asap. (note: you will not be able to visualize the coors and chases in the 3D) let me know what u want. sincerely,

So is this different from the COLORstrip profile included with the software?

Also, how do I obtain Mega Panel and Mega Pixel profiles?

I have the mega panel 7CH mode profile and all the different channel modes for the pixel. shoot me a email at jamesk AT american DJ DOT COM and i can get those to you asap. what channel mode did you want for each? welcome to the forums. Sincerely,

And also the profiles will run the actuallights the same but depending on which one you use you will see it mix RGB in the 3D or nothing at all.

Hi,

Newbe here. I'm looking for a profile for a Stageoutlet LED Par 64. 4 channels are R (0-100%), G (0-100%), B (0-100%) and Dimmer(0-74%)/ Strobe(75-99%)/ Full on 100%.

Any help would be greatly appreciated.

Thanks,

Andrew S.

If you can give me dmx values instead of percentage i can make it for you based off of what you posted. but shoot me an email at jamesk AT american Dj DoT Com sincerely,

Hello. I've made a profile for the Chauvet Colorbar which has 4 RGB LED panels all individually addressed and dimmable. I was wondering if there was a way to make the panel object for the 3D mode to display the four separate sections. As I have it set up it just displays the color for one of the sections. If there is not, is there a way I can make four separate 3D objects for one profile. Sorry if this doesn't make any sense. I don't have my laptop in front of me right now. Thanks for your assistance.
-Adam
www.thesolutionmusic.com

Well no there is not way as of right now to do it the way you described. but you could use the generic RGB profile as many times over for the fixture. and you can also modify the size of a fixture in the scan library editor. take a look around when you have the editor open next. if you need further help let me know i will post some screen shots. Sincerely,

Chauvet LEDsplash 200B light - is there a profile for this?

I just set-up my myDmx software on my PC today, I totaly have no clue what I am doing, but I am trying to use the visualizer to get a show up and going for a wedding this Saturday.

I have 2 Martin Acrobats (there is a profile for them) and I have 2 Chauvet 200B LEDsplash Wash lights but can't seem to find anything for them.

Can I just use another Chauvet LED par fixture? Again, I have no clue. Should I be doing this in the 3d visualizer, or would I be better off doing this live?

Is there anyway that I can get some basic shows set up by Saturday,or am I just dreaming...I really hope that I am not dreaming, I need to get this all together!

I am pretty sure I have that profile made but try downloading the Chaucer folder that is listed for download on the my dmx webpage on the ADJ site. I am away from my computer but I will try to get it to you ASAP if you cannot get it off the web. Sincerely,

Ok - I think that I am a bit crazy here - is it just me - because I can't seem to find the myDmx download page? Can someone provide a link to that page?

I have an Eliminator ED-15 but there is no profile for it could you help?

Thanks
DJ WES

DJWes welcome to the forums. sorry it took so long to respond i was on a little vacation for a few days. ill look up the light and i will try to get it done for you ASAP. give me your email address or shoot me an email at jamesk AT American DJ DOT COM Thanks. Sincerely,

Hey there

American DJ Mystic LED found it!
Chauvet Vue VI LED

email is zyrate-at-gmail-dot-com

Hey Zephre i can make the vue 6 profile for ya and have it mailed out by the end of the weekend ok? Sincerely,

Perfect. At some point I'll look into learning how to do this. Still on the learning curve atm

Check out the following video i have linked from the Compu Live Tech you tube channel i run.
http://www.youtube.com/watch?v=UO1Swkfll9I
i do also have a my dmx channel.
www.youtube.com/mydmxtech
Sincerely,

Hey Jingles...I am new here and too MyDMX. I am wondering how to get the profile for the Revo III 10 channel as there are a few already in the library for 4 channel ? Also, do you know anything about the Green Cosmic Storm from Extreme Lasers ? Is there a good step by step video or instructions on how to create our own profile for fixtures not already included in the library ? I am finding you and this forum to be very helpful in my learning process and appreciate any feedback or info on this. Keep up the great job !!!

Thanks,

Mark Butler

quote:

Originally posted by Jingles:
Check out the following video i have linked from the Compu Live Tech you tube channel i run.
http://www.youtube.com/watch?v=UO1Swkfll9I
i do also have a my dmx channel.
www.youtube.com/mydmxtech
Sincerely,

DJ butler welcome and let me just say i am orginally from MPLS,MN and i have family in east bethel. the video i liked too is the one for making your own fixture profiles. that should work for ya. but if you have ANY questions about the video let me know in a separate post or Email, jamesk AT americanDJ DOT COM. Sincerely,

OH, and shoot me an email for sure and ill get that profile to ya. Sincerely,

hi,
what program you use to make profiles?

We all use the same one. if you look in your program files and open the my dmx folder you will see "scan library editor" that is the program you can use to create your own profiles for fixtures. here is a video i put on you tube explaining how to use that program. www.youtube.com/watch?v=UO1Swkfll9I Welcome to the forums. Sincerely,

Need a profile for:

1)Laser CL-16RGY

Channel 1 Mode 0 - 49 Off
50 - 99 Static Patterns
100 - 149 Dynamic Patterns
150 - 199 Sound Active Mode
200 - 255 Auto Mode
Channel 2 Pattern Selection 0 - 255 52 Static/Dynamic Patterns
Channel 3 Position X 0 - 255
Channel 4 Position Y 0 - 255
Channel 5 Scanning Speed 0 - 255 0 Fast, 255 Slow
Channel 6 Dynamic Patterns 0 - 255 0 Fast, 255 Slow
Channel 7 Static Patterns 0 - 255 0 is small, 255 big
Channel 8 Color Selection 0 - 255 R, G, Y, 3 color combination
Channel 9 Color Segment 0 - 255 Divide in to 1 - 51 segments


2)American DJ FS2500 DMX
3) Electro 196 (LED)
7 chennels - R-G-B-R-G-B-R


Thanks,

DJ

DJ wassup? i will try my best to get the laser profile made by the end of the weekend. the electo 196 i have a profile for. and the follow spot dmx has no values for me to enter in for a profile so just use 2 generic dimmer profiles and you should be set. email me at James k AT american DJ DOT COM and ill send you out what i have so far. Sincerely,

Dj. hello, sorry i have not sent out any profiles yet. i am in the process of recovering from a major computer crash. i lost all my files i am currently restoring or trying to get back all my data now. ill send em out to you ASAP. Sincerely,

hey i also need the profile for the color strip
(Deleted to prevent spamming)

THANKS

Sent out.

I need a profile for a chauvet Elan and chauvet scorpian sky (laser). Please email me at ipan_boy@yahoo.com

Thanks

Hi there, Could someone help me out with creating a profile for a MICROH LED BAR II?
Please email me at wotmo1@yahoo.ca THANKS!!!
Here's the DMX info: (11 Channels)

Channel 1: 0-3 Light Off
4-9 Light On
10-39 Strobe
40-69 Fade in and Fade out
70-99 Auto 7 Color Change
100-110 Chase 1
111-121 Chase 2
122-132 Chase 3
133-143 Chase 4
144-154 Chase 5
155-165 Chase 6
166-176 Chase 7
177-187 Chase 8
188-198 Chase 9
199-209 Chase 10
210-220 Chase 11
221-231 Chase 12
232-244 Chase 1-Chase 12
245-250 Sound Chase
251-255 Sound Strobe
Channel 2: RGB Dimmer (Master Dimmer)
Channel 3: Red Dimmer 1
Channel 4: Green Dimmmer 1
Channel 5: Blue Dimmer 1
Channel 6: Red Dimmer 2
Channel 7: Green Dimmer 2
Channel 8: Blue Dimmer 2
Channel 9: Red Dimmer 3
Channel 10: Green Dimmer 3
Channel 11: Blue Dimmer 3

freddy, welcome to the forums! ill get this done for you by the end of this weekend.
sincerely,

Hi folks,

Would it be possible to send me on a copy of the Chauvet Q-Spot profile?

Many thanks!

Gordon AT livingframe DOT CO DOT UK

Gordon, welcome to the forums! enjoy the profile.
Sincerely,

Hi all.
I have downloaded the mydmx software , excellent.
I cannot find the ACME Impossibled fixture , also the NJD datamoon fixture has 2 DMX channels, where as my datamoon has 4 channels.
OK where am I going wrong

Thanks

Spriguns, Welcome. You haven't gone wrong. if you need a profile made cause there is not one in the library already you came to the right spot. I'll make the profiles for you or help you modify the exsistening ones to suit your needs. so if you can shoot me an email with the dmx traits for both of those fixtures and ill get the profiles made. my email is jamesk AT american dj DOT COM. I look forward to helping you out.
Sincerely,

There appears to be no profile available for the "Acme LED Dynamo" btw this is actualy a 4 channel dmx fixture not a 6 channel one despite what acme's website says.

So, I take it that the manual is not properly representing the light?

You have choices. 1 is to do it yourself. 2 is to play with the fixture and see if you can figure out all the values. Hopefully, it's more like the manual talks about things the light doesn't do.

So, best bet might be to share values and maybe a description of the light and maybe Jingles has the time to make one for you.

I'd try it myself, but I'm to slammed between hardware failures and shows. I'd rather be slammed due to shows, not due to computer hardware failures(4 failed drives this year, 5 routers, my wireless internet roof-top box, 2 CPUs, it's been rough!)

the information in the user manual is correct but acme's website is not. when i get a chance i will write up all the values

I need one for the Chauvet DJ Squeeze II. The ones supplied are the older models and there not compatible. I can send you a scanned page of the DMX values.