Hi. Have done an installation in a church, 4 x FR150Z high upon the ceiling. The cooling fans are too noisy on full on. Churches are often quit during services. Someone have a picture of the fan installed in a FR150Z so I can see the spec. Some physical mesurement, W X H X D please? Plan to install some other low noise fans. It is 7 meters up to the lamps, so it would be nice to know spec. before doing the exchange. Regards Sven Arild, Norway
Replies sorted oldest to newest
Hello, according to the manual you can override the fan settings to always be LOW, by default they are set to AUTO.
There are updated measurements in the manual as well: https://www.adj.com/encore-fr150z
Hi, thanks for reply
Yes, that`s correct. Will it be enought with LOW speed only? Is low fan speed enough? I thought that LOW speed will be too small when they are mounted high up under the ceiling. I`m thinking of overheating and problems..
You'll have to see if the low setting is low enough for your needs in terms of quietness, but i imagine we've selected strong enough fans for most indoor temperature situations.
That being said, its not going to be as simple as finding a new fan and swapping it out, the fixtures are engineered to specifications and have specific controllers and firmware in place for certain specific components, not to mention you'll void any warranty you have.
Hi. Thanks for reply, think I will set the fans in LOW mode and try.
