Recently purchased a DOTZ Tpar for a stage wash for a small folk venue. Wanting to hang the lights and use the RF controller. Original RF not working (reviewed with ADJ support). New RF unit sent... same.
Prior to returning unit (at my expense apparently), I need to be sure this is not operator error. I am new to lighting. Seeking assistance from experienced DOTZ Tpar user to ensure my issue is NOT operator error.
Please contact on private DM if you can assist.
Replies sorted oldest to newest
There is a setting in the light that turns the remote function on or off, it would be under the “RF Active” display. Have you tried that? If it is set to on but nothing is responding from either remote then more than likely it will be the light.
Yes, I was aware of the RF Active menu and it was set properly. The blackout button worked once but then I would have to cycle through the RF Active On and the Off and then On again before the blackout would work again. Then it stopped working again.
