Diving in

Seems to me like a good configuration would be hanging the 2 DJ Spots in the back off the truss with the non-DMX effects. You can then hang the 4 P56 LEDs around that stuff on the back as well. That would leave you with 4 P64s a side for front light. You might also try putting the DJ Spots on the ground as well. If you put them on the ground, you should have enough room then to do 8 P64s across the back and 2 P56s a side for front light on the T-bars.

The best thing to do, however, would be pllay around and see what works. Learn how different configurations work and try new things. That is how you learn .

I have to agree.

You want your washes out front and your effects shooting through. Without front trussing, you have some constraints as to what may be possible.

Besides, if you get a fogger or hazer, the lights shooting through the stage should look pretty cool.

You might want to upgade your control system to a better controller or perhaps a software solution. It wil work a lot better for the intels and LED fixtures.