ADJ Sampling Mixers

Former Member

I just Ebay'd my Dr Sample SP 303 (sniff boohoo and sheyat) after a couple of years of good use.

I just got tired (mobile) of setting the damn thing up on the edge of my American Audio
PS SYS coffin and running the thing thru the
QD3 and mic.

I enjoyed sampling voices and riffs (the PS has a sampler but 3 pads aint sheyat) My
question is why dont American DJ offer a
sampling mixer (also uses the mic section)
Neewmark has one (lousy 12 bit) and Jemini
Cricket makes two models (awful but samples mic)

I'd like to see a nice 10-12" model w/ 4 banks
that sample 2 channels incl the mic, at a nice 16 bit, 40-60sec total time w/ a BNC light.

Or supersize w/ a full size 6 space
19" EIA , 8 bank, 2 minutes @ 16 bits, throw in
a 4 bank flange, reverb, echo and pitch w/ BNC light.
I'm willing to pay $379.99 for the scratch version or $469.99 for the 19" version.....

5/17/041:35 AM

❤️ 0

Original Post

Former Member

Aww man, that's a great little sampler. I'm still using one! Of course, with the QMX2, I have that third channel which makes life easier. I usually just setup my samples ahead of time, can't really grab things "on the fly". I mean, you could loop one deck through it, but then your limited to only sampling off that one deck. What you need is a mixer with effect send & return, seperate for each channel. That way, you could send out either deck to the sampler, and not tie up your mic.
That's my next purchase, a mixer with effect send & return. Right after a set of ScanTrons...and subs...and two CDI-500s...But right after that, a new mixer.

5/17/047:11 AM

❤️ 0

Add Reply

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...