Wi-Fly Lights & ADJ LED RC2

sirwesleyMember

Do the new line of Wi-Fly Lights support programming via the LED RC2 remote? I know they support RFC control, but I don't have a need for that. I typically hang all my lights then go back through and program the DMX address with the RC2 remote. I hope these new lights didn't lose this functionality, however, I see nothing mentioning it in the manual.

Please tell me I can still program them with the LED RC2, as the RFC doesn't have the ability to set DMX addresses, which is the only thing I use the remotes for anyways.

If LED RC2 functionality was removed, please make an RC2 compatible light that is also compatible with WiFly.

Thanks.
-Wesley

5/21/131:11 PM

❤️ 0

Original Post

Replies sorted oldest to newest

sirwesleyMember

Another quick question related to the Wi-Fly lights. Do the lights pass the DMX signal onto the DMX output of the light so that I can continue my DMX chain from that light?

For example, can I do the following:

DMX Controller --(WIRED DMX)--> DMX WIFLY Transceiver --(WIRELESS DMX)--> WIFLY PAR QA5 --(WIRED DMX)--> Slim Par Profile

Does that make sense. I would expect that it should work, but just want to make sure.

-Wesley

5/22/1310:01 AM

❤️ 0