WAS UP ADJ , IF SOMEONE HAS INFORMATION ABOUT ROLLER TRON 250 COULD YOU HELP ME OUT?

Former Member

If someone has an Roller Tron 250, could i get some information so I could start programing my systemsays:
If someone that owns a Roller Tron 250 could help me and give me some tips of how I could program my system using only a DMX controller, so i can get a head start with my system I would appriciate it.?
Atte Dj click form Albuquerque NM saleen2001@hotmail.com

2/2/0511:23 PM

❤️ 0

Original Post

Replies sorted oldest to newest

Former Member

Welcome to the forum!

What DMX controller do you have?

You may want to check the Roller Tron's manual. It has info on setting channels and other tips.
You can find it here: http://www.americandj.com/pdffiles/RollerTron%20Final.pdf

2/7/055:35 AM

❤️ 0

Former Member

i got Dmx solo the controler that comes with the sistem

2/7/059:35 PM

❤️ 0

Former Member

Well, from what I've read here: http://www.americandj.com/product.asp?ProductIDNumber=974&cat=DMX_Controllers
you can't directly program the DMX Solo. You would need a DMX Operator or Show Designer to make your own programs.

2/8/056:58 AM

❤️ 0

Former Member

Ok ,,,, and the ( DMX PROGRAMMER) it's ok if i get that one

And how that one works ?

2/9/052:49 AM

❤️ 0

Former Member

If you go here: www.americandj.com

Then click on the drop down box that says "CONTROLLERS", and choose "DMX", you can find out about all of the DMX controllers ADJ offers.
They all come with pretty good instruction manuals.

2/9/054:37 AM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...