vsm2 not working properly with asio drivers with sandy bridge cpu

Former Member

Does anybody have same problem.
I have a vsm2 controller and it doesnt work all the time. It does work but seems
to be un-reliable. The right channel doesnt always work with Virtual dj 7. You cant
pre-listen to it either. The problem is usually solved by rebooting the laptop but off-course you
cant do this in middle of gig. I have contacted ADJ and is here is their rely :

"the cpu that you are using is a Sandy Bridge CPU from Intel which have a lot of problems
with asio soft/ and hardware . This should be also the cause of your problems".

Is there any fixes? ADJ say intel have none. What about the latency settings. I have it at 5ms.
If i put this setting higher would it help.

6/29/122:03 AM

❤️ 0

Original Post

Replies sorted oldest to newest

Former Member

Have you tried it with the included software and Asio drivers? It is best to test it that way

6/29/1211:44 AM

❤️ 0

Former Member

i was using the controller at weekend and it seemed to work ok. The only problem is that it is un-reliable. im using vdj pro 7 & drivers supplied with controller.

7/3/125:02 PM

❤️ 0

Former Member

what exactly do you mean with "unreliable"?

7/4/1212:26 AM

❤️ 0

Former Member

Sometimes when you connect to virtual dj the vsm2/virtualdj is unreponsive. Other times its fine.
Sometimes when you using vsm2 it works fine but after a while right channel dosnt work. No sound comes out and you cant pre-listen to channel. virtual dj works fine but just no sound. When this happens annolog doesnt work either. Usually resolve issue by re-booting but you cant exactly do this in middle of gig...
I did a gig last saturday and it worked fine allnight..!! problem is next gig it might not..

7/9/121:30 AM

❤️ 0

Former Member

i cant confirm this "unreliability" neither with my old vms4 nor my vms4.1 - but i'm using traktor, not sure how much makes a difference here.

have you been in contact with the support?
if not, i'd suggest to write to them.

7/9/122:07 AM

❤️ 0

Former Member

i have figured out what the problem is. Just in case anybody comes across same problem. I was using a automix skin in virtual dj which was cauing the system to be unstable when using VJ with vsm2. Changed skin to vsm skin that comes with vdj7 and all seems to be fine now. So much for american dj. The simple answer to problems with their equipment " you computer is not suitable". wonder to they use that answer all the time....

8/29/1212:22 PM

❤️ 0

Former Member

let's be honest here. how would anybody think that a skin (!!!) affects audio output and connectivity of an usb device?

i dont think you can blame ADJ here for not trying to help you the best imaginable way.

8/30/121:54 AM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

Please wait...